Request for Protein Skimmer Advice

[enthusiast2]

Hi Roger,
Happy Holidays!
At this point, my existing protein skimmer is more than 10 years old and needs constant attention. In addition, it was not rated for a 120 gal. With a 120 gal w. SPS, soft corals, and 6 medium to small sized fish, I am concerned that the 9140 would over skim. The system is doing well with all corals growing, etc. Perhaps I am overly careful, but the inefficiency of the old skimmer may leave some useful nutrients in the water. The live rock produces enough "food" to keep the Dragonet (Green Manderinfish) well fed. The sump water level is ~ 7 inches which means that using the Classic series would require a means of lifting the skimmer.
BTW, I notice that the TUNZE power usage is still very low compared to your competition.
Do you have any suggestions?
Alain

 

[rvitko]

Hi Alain,

You could use the 9410 and simply up the feedings for the corals and fish or use the 9011, if I recall what you have now is a 9010, they are not much different but the 9011 is a little stronger largely due to a larger airline so it can take in more air. It is likely also possible to refurbish what you have and possibly even replace the pump if needed. The 9011 pump will work in a 9010.

 

[enthusiast2]

Thanks for the advice

Thanks for the advice

Hi Roger,

I purchased a 9410. Many years from now, I will try to remember that a replacement pump is a great way to extend the life of my new protein skimmer.

Thanks,

Alain