Retro fitting my T5 fixture with leds but need help

[undertai]

Looking to retrofit my 6 bulb Tek Elite Fixture, want to replace to bulbs with Led arrays. I found a couple chips that could work but want to get peoples input if these would work or other options. I'm going with single multi-chips instead of individual chips for space and install time concerns.

I found the below and wanted to know if these would work or are the better options out there. My tank is a 40 gallon breeder and is a SPS reef tank with a couple LPS along the sand bed in shaded areas.

#1
4 Channel Cree XPE XP-E + Epileds Multichip Led Emitter Light
channel 1: 5PCS Cree XPE Royal Blue 450NM 15V 350-1000MA
channel 2: 3PCS Cree XPE Red 620NM + 2PCS Epileds Cyan 490NM 12V 350-600MA
channel 3: 5PCS Cree XPE Cool White 6500k 15V 350-1000MA
channel 4: 3PCS Cree XPE blue 470NM + 2PCS Epileds UV 420nm 13-14V 350-600MA

#2 - Uses Cree XTE 6500k
channel 1: 2x semiLEDs UV395nm + 2x semiLEDs UV415nm 12V 1A
channel 2: 4x XTE white 6500K 12V 1.5A
channel 3: 4x XPE blue 480NM 12V 1A
channel 4: 4x XTE royal blue 455nm 12V 1.5A
channel 4: 2x XPE green 530nm + 1x XPE yellow 590nm + 2x EPILEDS red 660nm 12V 600MA

#3 - Uses Cree XPG2 6500k
channel 1: 2x semiLEDs UV395nm + 2x semiLEDs UV415nm 12V 1A
channel 2: 4x XPG2 white 6500K 12V 1.5A
channel 3: 4x XPE blue 480NM 12V 1A
channel 4: 4x XTE royal blue 455nm 12V 1.5A
channel 4: 2x XPE green 530nm + 1x XPE yellow 590nm + 2x EPILEDS red 660nm 12V 600MA

#4
Model Name: CREE XPE 100W
Emitted Color: 16PCS 450nm royal blue + 6PCS 10000K cool white+3PCS 620 red+2PCS 520nm green+ 3PCS 420nm SemiLEDs uv
DC Forward Voltage (VF): 29-30V
DC Forward Current (IF): 1-3A