five.five-six
Well-known member
On my way out the door this morning, I went to fill my ATO container and found that my brute reservoir was only 1/2 full, There was enough for me to siphon 5 gallons out to put in my ATO container but it seem that my RO DI just stopped makeing water a few days ago.
I checked all the valves and the are open, even closed and opened them just to check. I opened the membrane flush valve and I could hear the water run through it. I disconnected the PE tubing from the float valve on the brute but no water came out and that was the end of my troubleshooting before I had to leave for work.
I suspect the ASO but before I order one, I'd like to see if there is anything else I might order. There is only 5 gal in my ATO container and I evaporate 15 gal a week so I need this fixed in 3 days on the outside
Thanks for the help.
I checked all the valves and the are open, even closed and opened them just to check. I opened the membrane flush valve and I could hear the water run through it. I disconnected the PE tubing from the float valve on the brute but no water came out and that was the end of my troubleshooting before I had to leave for work.
I suspect the ASO but before I order one, I'd like to see if there is anything else I might order. There is only 5 gal in my ATO container and I evaporate 15 gal a week so I need this fixed in 3 days on the outside
Thanks for the help.