RO/DI unit pressure

[Neoz]

Need some help, I emailed the filter guys were I bought my unit. But being a weekend doubt I'll hear from them soon. I installed my unit which is a OCEAN REEF + 1 FIVE STAGE 75 GPD. I originally only had about 20lbs of pressure

So I received my booster pump and installed that. Its a AQUATEC 8800 SERIES BOOSTER PUMP. The one they recommended. Now my pressure is at 98lbs on the gauge . I don't see any way to dial the pump pressure back.

Looking at the filterguys website I don't see anything saying it CAN'T have that much pressure. I know most people prefer around 60lbs.

My thoughts are as long as the Meter is reading 000 PPM out I should be ok correct? Meter is reading 005 PPM for incoming water.

This pump runs very quiet for the size of it. Very happy with it. Oh and talk about pumping out some RO/DI water!

...

 

[Neoz]

I found the adjustment on the unit and turned down the pressure to 70 PSI. One thing I did notice. I had a lot less waste water at the higher pressure at least it seemed that way. .

So what does everyone have for pressure on there gauge?

 

[pimpinitup6969]

70lbs is what mine runs at