RODI Help

Something does not sound right. You sure you have the water saver kit installed properly?

Not sure if you are running mix bed resin. If you are you should look at the PRO resin and replace only what you need.

Sent from my SM-G975U using Tapatalk

Water saver kit installed correctly. I have even removed the saver kit and still run through alot of media. When recharging media the anion and cation are separated so would be easy enough to run it through them at seperate chambers, then run through a final mixed bed, but that would involved adding 2 more stages to the 5 I already have.
 
That is what I did. I added two more stages. I run Cation, Anion then mixed bed.

I have made about 200 Gallons of water and my Anion is almost half used. None of the others have changed much.

My TDS in is about 250, I am now getting 2 TDS out of the RO and 0 out of the final DI stage.

Adding the Booster Pump which is giving me 90 PSI has made it more efficient

Sent from my SM-G975U using Tapatalk
 
Back
Top