safe place for frags?

angry.clownfish

New member
Where does everyone else keep their new frags if you don't have a frag tank? I've seen those egg crate type thingy that you can place in the tank and put frags on top of.. where can I buy something like that?

Thanks in advance
 
I make mines out of soap dish pieces.. just cut some pieces

tankpics014-1.jpg
 
never thought about soap dishes, I will consider this... currently, my sand bed is a no-no, i have some critters that would to eat new frags.
 
I riddle most all of my rocks in the reef with holes so I can hang frags any angle anywhere I want.

simply drill a shallow hole into tiny pieces of rubble. glue a piece of thin acrylic rod to it..........this acrylic rod and frag "plug" goes into the holes you have drilled.


especially for sps you get much better lighting to the frags this way than hanging off the side of the tank. I do have a mag float with eggcrate glued to it I use soemtimes as well.....
 
Last edited:
<a href=showthread.php?s=&postid=11402002#post11402002 target=_blank>Originally posted</a> by Hypertek99
How come i can't get that link above to work???

I had the same problem clicking the link, try a copy and paste. that worked for me.
 
okay, a lighting rack thing, a couple plastic hangers and 4 rubberbands later... I have a frag rack that hangs from the top of my tank!, it doesn't touch the side of the plexi, just the top so I have less worry that the pods will find their way to my frags. I can just lift the thing out and store it away when I'm not using it










from the right side view
 
:thumbsup:

You may want to replace the rubberbands with cable ties. Over time the rubberbands will degrade and fail.
 
<a href=showthread.php?s=&postid=11407675#post11407675 target=_blank>Originally posted</a> by Agu
:thumbsup:

You may want to replace the rubberbands with cable ties. Over time the rubberbands will degrade and fail.

FINE! BE THAT WAY THEN. :p



IO have some zip ties that I will use.

Thanks for the tip! :rollface:
 
Back
Top