Setting up a new reef

Scrandrew

New member
I have maintained aquariums all of my life. Prior to the birth of my daughter, I took down my 265 reef and have been out of the hobby for a couple of years. I am now chomping at the bit to set one up and have been preparing to do so. As such, I am posting what I have purchased to date, upon hope that you will give me some feedback on my thought process and equipment. More importantly, I am contemplating purchasing a calcium reactor and an ozonizer. I intend to keep all types of corals from SPS to zoos, and would also like to keep clams. I have successfully kept these in the past. Please give me your thoughts.

First, the stuff I already have. Could you give me your opinion.

1. 210 reef ready glass aquarium
2. 10,000 K ushiro/T5 actinic - aquactinic hood - 3 MH with T5s
3. Moonlight attachment to supplement the above
4. ETSS 1000 skimmer
5. Iwaki - MD 70 RLT (for the skimmer)
6. Blue Line - 70 - for circulation
7. Kent Marine RO/DI with silicate - 65 GPD
8. 2 Seio SM 1500 with Seio controller
9. Wave 2K wavemaker
10. 2 of the 1 inch Sea Swirls for the returns

How I intend to run the setup. Your thoughts.

I will run a 75 sump tank with 1/2 of it dedicated to a refugium. I have a power compact lighting system which will run on the oppostie day/night cycle of the main tank. I juiced up the reef ready predrilled overflow boxes by making both holes (one that goes out one that is for a return) into two holes that go out - to increase circulation.

The equipment that I still want.

1. A Koralin Calcium Reactor - everyone says it is good - but - since I never used a calcium reactor on previous tanks, I would like your help.
2. An ozonizer - for a safety backup. I do not know which one to get, although a friend of mine used the Red Sea model with some success.

Thank you for taking the time to read this and I look forward to your input.

A~
 
IMO, most of what you have sounds good. However, I have heard differeing opinions on the Koralin reactors (like they are hard to dial in), and I've never found it necessary to run an ozonizer.

Other than that, it sounds like you'll have a kick-butt system.

Kevin
 
Im planning a 180g with nearly the same idea of using both of the overflow holes as drains.

What kind of a return pump were you planning and what flow rate do you expect to see?

Also, what do you think of penductors on the sea swirls?
 

Similar threads

Back
Top