Share your Radion Graph!

[Krazie4Acans]

I use the presets. I've ran the same program for about a year and I added the four 54 watt T5's about 5 months ago. The T5's run from 11am to 6PM. I use Apex Fusion w/ WXM module. Here is my graph.

Can you switch to the basic view so I can see the table that goes along with this graph? Thanks! Krazie :jester:

 

[diegoluv]

Can you switch to the basic view so I can see the table that goes along with this graph? Thanks! Krazie :jester:

I'm not sure what you mean. I'm not aware of a basic mode in fusion but I'll look when I get home. What are you trying to figure out? The times and presets are at the bottom.

 

[Krazie4Acans]

The basic view icon is the last one on the group of icon at the top left of the page. It will show you the raw table data that makes up the pretty picture that you already posted. I'm trying to mimic a similar graph on a none Radion setup but need the table values and not just the colors and intensity data.

If you would take a look and post it for me I would greatly appreciate it. Krazie :jester:

 

[Krazie4Acans]

Any luck on the basic view?

 

[diegoluv]

Any luck on the basic view?

Sorry for the delay. Here you go. It's the same for both radions and again, I have four 54 watt T5s running from 11am to 8pm. The T5s have 1 blue and 1 Fiji purple in each fixture for a total of 4 36inch bulbs.

 

[Krazie4Acans]

Sweet thanks.

 

[diegoluv]

I'm about to increase the light intensity of each setting by 10% to make the radions max out at 100% at the peak of the day.

 

[Krazie4Acans]

That won't change the table much. And intensity is separate from the color data anyway.

 

[Frootstick]

So I should finally get my apex system next week.
How do I go about setting up a graph for my Radion xr30w pro?
Is there stock templates in fusion?

 

[Krazie4Acans]

Does anyone have the information on what each of the columns in that basic view table mean? I know that column 4 is the intensity and that the 6 columns to the right of that are for color channels but does anyone know which color is which column? I could really use some help with that info from someone who actually has an Apex and a Radion. Thanks!

 

[Krazie4Acans]

So I should finally get my apex system next week.
How do I go about setting up a graph for my Radion xr30w pro?
Is there stock templates in fusion?

You ordered the WXM module with your Apex, right? Without that the Apex can't talk to your Radions. There are built in profiles with the Apex for some colors when you plug in the WXM. You can also create your own custom colors and color schedule just like you can with ESL.

 

[Frootstick]

Hey mate.
Yes I ordered the WXM module also. I work away so have not had time to really play with the ESL graphs also. I just downloaded a few that other users had setup and ran with them.
I was hoping to do the same, but doesn't look like you can load up templates?

 

[Krazie4Acans]

Hey mate.
Yes I ordered the WXM module also. I work away so have not had time to really play with the ESL graphs also. I just downloaded a few that other users had setup and ran with them.
I was hoping to do the same, but doesn't look like you can load up templates?

There are quite a few people that have posted their Apex tables for use with radions. They just aren't on this thread. This thread is more tuned toward Sharing ESL graphs between Radion users.

 

[inktomi]

Everyone mentions John's graph.. but I can't seem to find it.

Would anyone be willing to repost it?

 

[NewJack]

post #7
first page of this long thread. It's a nice starting point schdule. I personally use it on a mixed reef. I may tweek it in the future, but not anytime soon.

 

[inktomi]

Bah, thanks!! I thought it was a much more recent post

 

[Duality]

I've been running my radions at 100% max power for a few years now. I've found I get the best growth and color when all spectrums r ran at 100%.
Here's a few pics

4/19/15

8/6/15

4/19/15

8/6/15

4/19/15

8/6/15
Up until this last week I was running all 5 of my gen1 radions @ 100% for 10 hours a day with a 1 hour ramp up and ramp down. So the lights were running 12 hours a day total. Then on Thursday I changed my lighting schedule all the way do to my excessive Edison bill. Now I only run the lights at half power during peak hours. Here's my new lighting schedule

 

[TanksDad13]

New to Radion

New to Radion

I have a 28 gal nano, 18x22x22. I'm running the graph below.... I'm running it on 65% intensity. After pouring over the 37 or so pages of this thread, I can't really find any input on a smaller, shallow tank. I have only had my lights for going on a week and don't want to bleach or fry anything... I have an XR30 Pro G3 on the RMS approximately 9" off the water. It's Does anyone with a tank dept similar to mine with a mixed reef have any input? :bounce3:

 

[TanksDad13]

Everyone mentions John's graph.. but I can't seem to find it.

Would anyone be willing to repost it?

Here ya go! Though I have found some ones that I like a little better.

https://drive.google.com/open?id=0B4fSBi50zyq7Mlp2OW44T2FuMTA

 

[Krazie4Acans]

I have a 28 gal nano, 18x22x22. I'm running the graph below.... I'm running it on 65% intensity. After pouring over the 37 or so pages of this thread, I can't really find any input on a smaller, shallow tank. I have only had my lights for going on a week and don't want to bleach or fry anything... I have an XR30 Pro G3 on the RMS approximately 9" off the water. It's Does anyone with a tank dept similar to mine with a mixed reef have any input? :bounce3:

First off I think your levels are about right for the tank you have. My only issue is that you say you're running an XR30 Pro G3 but your pictures show that you are running an XR15 Pro G3. If you were running an XR30 Pro G3 over that tank at 65% you would have bleached white mush in there.