BreadmanMike
New member
Here's mine! This is a 48x48x25 made by envision. James really is a class act to work with. 
It should be here in two weeks.
It should be here in two weeks.
show me your CUBE!!!
- Thread starter corro
- Start date
- Status
reefkoi
Premium Member
the skimmer is hid in the 150 gallon sump
The tank is floating, its sitting on a piece of steel thats 5/16" thick
heres a link to the build thread so you can see how it works
http://reefcentral.com/forums/showthread.php?s=&postid=9302886#post9302886
The tank is floating, its sitting on a piece of steel thats 5/16" thick
heres a link to the build thread so you can see how it works
http://reefcentral.com/forums/showthread.php?s=&postid=9302886#post9302886
xtm
Active member
<a href=showthread.php?s=&postid=9388385#post9388385 target=_blank>Originally posted</a> by reefkoi
the skimmer is hid in the 150 gallon sump
The tank is floating, its sitting on a piece of steel thats 5/16" thick
heres a link to the build thread so you can see how it works
http://reefcentral.com/forums/showthread.php?s=&postid=9302886#post9302886
I love your tank & the way you have it set up. Very unique concept!
Last edited:
BreadmanMike
New member
This thread is what made me decide on a cube. There's a ton of beautiful cubes pictured here. I can't wait to get this project started.
reeferman75
In Memoriam
my cube
my cube
here is my 106 galolon cube I just traded for . It is 32"W x 32"L x 24" tall. We post updates on build
[/IMG]
my cube
here is my 106 galolon cube I just traded for . It is 32"W x 32"L x 24" tall. We post updates on build
Lunchbucket
Premium Member
reefkoi Ok that is frigging cool! I'm off to check out the tank build thread! VERY nice
Aquaticman74 - Nice looking tank. Have a thread started on it yet??
later
Lunchbucket
Aquaticman74 - Nice looking tank. Have a thread started on it yet??
later
Lunchbucket
reefin'aggie
New member
Haven't posted in a while but here is my latest experiment.
This is a 0.5 Gallon (5x5x5) cube. It will be fully sumped with an external calfo overflow.
Check out the build thread: http://www.pernelf.com/forum/index.php?act=ST&f=2&t=1906
Jacob
This is a 0.5 Gallon (5x5x5) cube. It will be fully sumped with an external calfo overflow.
Check out the build thread: http://www.pernelf.com/forum/index.php?act=ST&f=2&t=1906
Jacob
BreadmanMike
New member
I haven't decided if I'm going to do a thread yet lunchbucket. I might just post a summary after I get it finished.
reefin'aggie
New member
Well, I didn't like the way the little acrylic cube was going so I decided to have some 1/4" glass cut. The new dimensions are 6.25x5.5x5.75Tall. Inside dimensions come to about 0.7 gallons.
The little microjet pump.
I also decided to resand it down and add the molding(sp?). I was able to carve it so that the corners are seamless.
Can of tea for size.
I still need to cut the back out for the external overflow.
When I build the new canopy I have some smaller rope trim to match the stand trim.
The new overflow for the back.
I should be able to get most of it finished tomorrow.
Jacob
The little microjet pump.
I also decided to resand it down and add the molding(sp?). I was able to carve it so that the corners are seamless.
Can of tea for size.
I still need to cut the back out for the external overflow.
When I build the new canopy I have some smaller rope trim to match the stand trim.
The new overflow for the back.
I should be able to get most of it finished tomorrow.
Jacob
reefin'aggie
New member
Sorry, double post.
Jacob
Jacob
reefin'aggie
New member
Thanx. Honestly I have no idea. Maybe a small shrimp pair. I can't really recall any fish small enough that would be even a little happy in it. I'm open to suggestions.
Jacob
Jacob
reefin'aggie
New member
Oh, I am in the process of populating a small rockstack in my friends 180 with pods and coralline. My plan for this is to make it difficult to figure out how big the tank is without anything in the picture for scale.
Thanx again,
Jacob
Thanx again,
Jacob
- Status
