Skimmer Q&A Thread
- Thread starter mojo~
- Start date
Keith Thomson
Member
Hey Mojo, I am currently running a A200-1260 H&S and a Vertex in-250 on my 265 display, 90 gal. sump, 110 gal. dsb., 20 gal. refugium system, with a total volume of about 400 gallons. The two skimmers pull out almost equal amounts of skimmate. Do you think it would be beneficial to just go to one larger skimmer? I'm not really sure how efficently this system is working.
Thanks Keith.
Thanks Keith.
Keith Thomson
Member
I'm having a bit of a cyno. issue, but I don't think its because of skimming. The skimmers seem to really compete against each other. I have a chance for a BM220 CS and thought about replacing the vertex with it. Do you think the Alpha 300 would out perform the 2 skimmers?
Thanks Keith.
Thanks Keith.
Keith Thomson
Member
Thank's Mojo I really appreciate the help with this.
Keith.
Keith.
Is there a list of skimmers and min and max water levels
This would be very helpful in deciding on a skimmer.
I saw a list of skimmers in the the thread a while back
that listed skimmers for small tanks, medium tanks, then large tanks.
It would be great to have a table that had
name, price (~retail), size (LWH), tank size, sump level(if relevant)
Any change of that happening. I'd be willing to help out if you send me data
mm
This would be very helpful in deciding on a skimmer.
I saw a list of skimmers in the the thread a while back
that listed skimmers for small tanks, medium tanks, then large tanks.
It would be great to have a table that had
name, price (~retail), size (LWH), tank size, sump level(if relevant)
Any change of that happening. I'd be willing to help out if you send me data
mm
Love the thread Mojo, great job!
I am in the final stages of setting up my first large reef tank and would love to get your opinion on a quality skimmer.
Mixed Reef
Display = 245g
Frag tank = 40g
Sump = 90g
Fish = I don't have a list of fish or estimate on load but I would like a well loaded tank once finished
No space constraints I could go internal or external.
Budget = I would like to stay around $500 but if that isnt doable or if I would gain a lot by spending $1000 or more long term I am not totally opposed to it.
Thanks!
I am in the final stages of setting up my first large reef tank and would love to get your opinion on a quality skimmer.
Mixed Reef
Display = 245g
Frag tank = 40g
Sump = 90g
Fish = I don't have a list of fish or estimate on load but I would like a well loaded tank once finished
No space constraints I could go internal or external.
Budget = I would like to stay around $500 but if that isnt doable or if I would gain a lot by spending $1000 or more long term I am not totally opposed to it.
Thanks!
jgraz
New member
Ok got another question or problem, not sure.
Im just putting a Bubble Mague NAC3.5 in service. I have cleaned it all out and connected it all and placed in sump. Tank and sump are filled only with unsalted RODI at this point. I went to connect all wiring to make sure everything is set and this thing is bubbling like a rabid dog. Lowest setting still overflows. Any thoughts?
Also I have a question about the setting. When set to "max" setting the water in skimmer is at its lowest point and no air bubbles are present. When set to "off" setting skimmer is full of bubble water is very high in skimmer(basically inside cup). Is this normal?
Thanks in advance
John
Im just putting a Bubble Mague NAC3.5 in service. I have cleaned it all out and connected it all and placed in sump. Tank and sump are filled only with unsalted RODI at this point. I went to connect all wiring to make sure everything is set and this thing is bubbling like a rabid dog. Lowest setting still overflows. Any thoughts?
Also I have a question about the setting. When set to "max" setting the water in skimmer is at its lowest point and no air bubbles are present. When set to "off" setting skimmer is full of bubble water is very high in skimmer(basically inside cup). Is this normal?
Thanks in advance
John
mojo~
Skimmer Guy
That should be fine
mojo~
Skimmer Guy
Ill have to work on something with this
mojo~
Skimmer Guy
The SRO 5000 and jns sk5 would both be good.
mojo~
Skimmer Guy
the skimmer will not work are ll like it should in ro di water. Put in salt water and you will be fine. I do not suggest running a skimmer in ro water.
Tesla
New member
Mojo,
Great thread and lots of info.
I am in the middle of a 125gal build. I am planning on using a 55gal as a sump for starters. I will have a 20-30gal fuge and 20-30gal frag tank. With all the skimmers discussed here, my head is spinning with choices. Recirculating or not, large plate or small, pumps etc...
Could you help narrow the choices down. I would like to stay below $900.
I like your review if the Alpha 250, would something like that work (maybe the 200)
Concerns:
Ultra Quiet is preffered
Mixed with SPS and medium Bioload
Stand is 36in high
11in x 18in skimmer space
Water height is TBD
BioPellet Reactor
Future ozone possibility
I like the Vertex 200, Avast CS2 Bk pearl, SWC 230 cone, many ReefOctopus. I would like to not have to upgrade later and go ahead buy the best I can get for a good price.
Great Thread
Great thread and lots of info.
I am in the middle of a 125gal build. I am planning on using a 55gal as a sump for starters. I will have a 20-30gal fuge and 20-30gal frag tank. With all the skimmers discussed here, my head is spinning with choices. Recirculating or not, large plate or small, pumps etc...
Could you help narrow the choices down. I would like to stay below $900.
I like your review if the Alpha 250, would something like that work (maybe the 200)
Concerns:
Ultra Quiet is preffered
Mixed with SPS and medium Bioload
Stand is 36in high
11in x 18in skimmer space
Water height is TBD
BioPellet Reactor
Future ozone possibility
I like the Vertex 200, Avast CS2 Bk pearl, SWC 230 cone, many ReefOctopus. I would like to not have to upgrade later and go ahead buy the best I can get for a good price.
Great Thread
Similar threads
