Skimmer safety

[02WRXGT30R]

I just purchased a Profilux plus II and i plan on using it for ato and awc as well as many other things but i also had i idea to place a float switch in my skimmer cup connected to the profilux and have the skimmer plugged into the digital power bar so my question is could i program the profilux to shut the skimmer off if the float switch in the cup is activated

If so what would i need to do this just the level sensor and the expansion card for another level sensor

If not possible will it be possible with the release of the PIII

 

[Xiaan42]

Should be the same logic as an auto top off (just set your skimmer to the sensor connected to your skimmer cup eg sensor 1 = water 1). the only problem is you are probably going to run out of sensors if you plan on also having ATO and AWC. ATO needs 1 or 2 sensors and AWC needs 2 sensors.

 

[02WRXGT30R]

Can you not use the same 2 sensors for ato and awc

 

[AQD_ottawa]

http://www.aquariumcomputer.com/Forum/showthread.php?t=3

Its all covered here