Eric Noa
New member
I added a few SPS frags at the end of November and some have been loosing color slowly and turning brownish over the past few weeks. Not sure if I need to increase my light intensity because all my levels are right where they need to be so the water is not (shouldn't be) an issue. Some of the SPS have also gotten better coloration since I added them to the tank. All came from the same source so not sure what the issue is. I will post a picture of one that has lost color and one that has gained color.
Tank info:
I have a 150 tall (48"x24"x30") with 2x Photon16 about 6-8 inches off the water and this is my current light schedule. have a 150 tall (48"x24"x30") with 2x Photon16 about 6-8 inches off the water and my current light schedule is attached below.
Water Parameters:
Temp: 78-79F
Salinity: 1.025
Ammonia: 0
Nitrites: 0
Nitrate: 2-4
pH: 8.2
Phosphates: 0-2
Alk: 9 dKh
Mag: 1280
Cal: 380
Water Source: Cape Coral, FL city water process through RO/DI unit. 0 TDS
Salt: Reef Crystals
WC: 10% weekly
Sample images.
LOST COLOR

GAINED COLOR

Tank info:
I have a 150 tall (48"x24"x30") with 2x Photon16 about 6-8 inches off the water and this is my current light schedule. have a 150 tall (48"x24"x30") with 2x Photon16 about 6-8 inches off the water and my current light schedule is attached below.
Water Parameters:
Temp: 78-79F
Salinity: 1.025
Ammonia: 0
Nitrites: 0
Nitrate: 2-4
pH: 8.2
Phosphates: 0-2
Alk: 9 dKh
Mag: 1280
Cal: 380
Water Source: Cape Coral, FL city water process through RO/DI unit. 0 TDS
Salt: Reef Crystals
WC: 10% weekly
Sample images.
LOST COLOR

GAINED COLOR
