Scotty freddy
New member
The Entrance Reef is the replacement tank for my old 3ft BB ULNS tank. The old tank in the bedroom was starting to get on my nerves, it seemed as it became older the noiser it got or maybe it was a case of the older I got the more annoyed with small noises I became and I think it may of been the 2nd reason :lol:
So I decided to pull the tank down and sell off all the equipment and start a fresh somewhere else. We have a good size entrance hallway and Tammy and I had always discussed that a tank would look really nice in that spot as you walk through the door. So it was pretty easy decision as to where the new tank was going. Enough with the useless information now I'll get on to equipment list followed with some pics
Tank - 1300 x 600 x 500, 12mm rimless with the 3 viewing sides starphire and a central overflow.
Sump - 970 x 550 x 350 with 4 chambers, skimmer - cryptic - return/zeo reactor and also built in ATO
Stand - 50 x 50 steel powdercoated black
Lighting - 10x54w ATI Powermodule
Skimmer - Royal Exclusiv Bubble King Double Cone 180
Zeo Reactor - Vertex Rx-z 1.5
Flow - 4x Tunze 6095 running off Tunze 7096 multicontroller
Heater - Schego 600w
Return - Red Dragon speedy 3 50w
Dosing - Vertex Libra with 3 Vertex 2.5T dosing vessels
Plumbing - Royal Exclusiv red pipe with white bends
ATO - Tunze 3155
Electrical - K&J Aquatics PDU with front switches plugs at rear and I've made a custom box to hide as much wiring as possible to hide everything and make it look as neat as possible
Tank method - I will be running the Fauna Marin zeolight system, staring DT with base rock and it will also be barebottom
So I decided to pull the tank down and sell off all the equipment and start a fresh somewhere else. We have a good size entrance hallway and Tammy and I had always discussed that a tank would look really nice in that spot as you walk through the door. So it was pretty easy decision as to where the new tank was going. Enough with the useless information now I'll get on to equipment list followed with some pics
Tank - 1300 x 600 x 500, 12mm rimless with the 3 viewing sides starphire and a central overflow.
Sump - 970 x 550 x 350 with 4 chambers, skimmer - cryptic - return/zeo reactor and also built in ATO
Stand - 50 x 50 steel powdercoated black
Lighting - 10x54w ATI Powermodule
Skimmer - Royal Exclusiv Bubble King Double Cone 180
Zeo Reactor - Vertex Rx-z 1.5
Flow - 4x Tunze 6095 running off Tunze 7096 multicontroller
Heater - Schego 600w
Return - Red Dragon speedy 3 50w
Dosing - Vertex Libra with 3 Vertex 2.5T dosing vessels
Plumbing - Royal Exclusiv red pipe with white bends
ATO - Tunze 3155
Electrical - K&J Aquatics PDU with front switches plugs at rear and I've made a custom box to hide as much wiring as possible to hide everything and make it look as neat as possible
Tank method - I will be running the Fauna Marin zeolight system, staring DT with base rock and it will also be barebottom
Last edited:
