An Update
An Update
I decided to get off of my lazy @$$ and put some light under my tank. I had been getting by with a flashlight when I needed more light. I upgraded my Apex to the 2016 version and have several EB 832's so I decide to use a 1Link port to power the light. So...
I picked up a 12v-24v LED Light Bar from Amazon. Did some soldering, mounting and wiring and now I have light under my tank at the flip of a switch.
I had an on/off toggle switch waiting to be useful. Here is the switch temporarily mounted on wood (ghetto I know but temporary, I am waiting on a project box). The wood is mounted to my 8020 T-Slot stand.
I already had a DC24 to Bare Wire cable (from another experiment that did not work out) so I wired that up the the light bar and mounted it to a piece of wood.
Next, I mounted the light bar under the tank. The second piece of wood is attached to a side panel for rigidity.
Here is the light bar turned on.
Finally, here is the sump light up.
I like this so much that I ordered another LED light bar to install on the right side of the tank. That shop light in the last photo is now gone. I used that to check some of the wiring as well as my Apex code.