thinking of getting a nano wavemaker

[johnny313]

I have a 65g with a hang on overflow ( with the u-tube) I was thinking of getting the nano set-up. is the nano for a 65g? I will be upgrading to a 90 in the summer time though.
can I buy direct from tunze?

 

[shawnz28]

Yes the nano will work on the 65g and the 90g. You would need to put your overflow as close to the middle as possible to minimize surging into the box IMO. My only concern and not sure how valid would be splashing/surging into the overflow box and potentially causing bubbles to form in the J tube.

As for the last question, parts can be bought direct but for equipment Tunze sells thru a network of dealers a list of which can be found on tunze.com

 

[johnny313]

i didnt even think of the bubbles! it will give me a reason to get the 90 faster. i found it for like $378 online

 

[Jar*Head]

That is the retail price every where... Make sure you lower the hangon overflow a bit because when your wavebox properly dialed in, the water level drop a bit...

 

[johnny313]

its all the way down now. its like an inch under water now

 

[Jar*Head]

You can adjust it higher after the wavebox get dialed in. Like Shawn said make sure the overflow is in the center...