Tunze 9002 Attachment

[divecj5]

I am currently running the DOC 9002 Nano in the second chamber of my Biocube 29 although I just sort of have it "hanging" on one of the vertical dividers in the rear chamber.

My question is about how to use the two black pieces and the provided screws to attach it to the vertical divider. I tried following the directions but the problem that I'm running into is that one of the holes in one of the black pieces is not threaded and I don't understand how it would tighten down onto the frame without being threaded.

I really don't want to have to DIY or mod something to attach this correctly.

Does anyone have any pictures or a better description of how to attach this. Maybe I'm just looking at it wrong.

Thanks,
Adam

 

[rvitko]

I have some photos in my gallery that may help. Basically it works like a wood clamp. One screw goes in through the hole in the one piece and threads into the piece on the other side and that is what clamps it down. The second screw threads in through the threaded piece and pushes on the other clamp to "bite down"

 

[divecj5]

Awesome...thanks Roger. Hopefully I will be able to figure it out now. I think that's what I was doing but I'll give it another try.