Evolley1
New member
Tunze Wavebox 6212 w/ 6091 controller
For tanks from 52-317gal
Dimensions: L 4.9" x W 4.4" x H 11.8"
Comes with four Tunze magnets for easy mounting on glass or internal overflow box.
Magnet Holder up to a glass thickness of 3/4"
Asking price $250 MSRP new is $550
CustomSeaLife Velocity Pump T3 77830
Flow Rate at 3 ft: 800 gph
Inlet & Outlet: 3/4" MPT
Asking price $50
Iwaki MD55RLT Water Pump (Japanese Motor)
Inlet(MPT)/Outlet(MPT): 1"/1"
Flow Rate @ 4` Head: 1080 GPH
Max Head ft: 26.9
*Pump does have external rust on back fan cover. Can easily be scraped, primed and painted. Does not effect the performance.
Can be used with external skimmers such as MRC beckett skimmers
Asking price $150 MSRP $350
MRC MR2 Beckett skimmer
This skimmer was my first skimmer that I ran a 120 Gal tank on. It only has one Beckett and would likely need some TLC and mods to get it working again. I matched it up with an Iwaki MD55RLT and it worked wonders as an external skimmer. This would be best suited as a back up skimmer or a tinkering project.
Asking price $50
2 - Coralvue Lumen Bright reflectors w/ mogal sockets
20" x 20" x 9"
Asking price $50 each MSRP $110
CO2 tank with reef fanatic regulator
Integrated 110V solenoid valve
Integrated precision needle valve
Preset working pressure gauge making fine tune easy
Compact and chrome plated body
Compatible with standard US CO2 tanks
Tank and regulator have not been used for a couple years. There is external rust on the tank and regulator but it should not effect the performance.
Asking price $50 MSRP for regulator is $140 alone
Coralife Pure-Flo II 4 stage RO 50Gal unit
All stages would likely need to be changed. I bought as a backup unit but never used. It comes with a Hanna Dual TDS meter. Battery would likely need to be changed.
Asking $50 MSRP $150
36 x 13 x 15-3/4 acrylic 30 Gal RO/Salt mixing tank
This tank was used for auto top off for display. It was also used for a gravity feed saltwater mixing tank to make water changes nice and easy. There is a bulkhead in the bottom for the gravity feed. All bulkheads and float valve are included.
Asking $60
35 x 20 x 15 Custom acrylic sump/refugium
This sump/refugium was made to fit on the inside of a 4' x 2' stand when I had a 120 gal tank. It has a drain compartment that also doubled as a external skimmer feed box. The water flowed into the next compartment along the back wall where it ran through three baffles before entering the return compartment. Along the back wall I also had a small Eheim pump pushing water through a spray bar to the refugium compartment up front. The refugium then overflowed back into the baffle portion before hitting the return. This combo was extremely successful for me when I ran the 120. I'm sure it could be modified if a refugium was not used.
The top is euro braced to incorporate two glass panel tops to minimize evaporation and add a light strip if necessary.
2 - 1" bulkhead holes. One used for the external skimmer in the drain compartment and one for the return.
Asking $100 and it includes the pump. It was purchased for $300 when made.
For tanks from 52-317gal
Dimensions: L 4.9" x W 4.4" x H 11.8"
Comes with four Tunze magnets for easy mounting on glass or internal overflow box.
Magnet Holder up to a glass thickness of 3/4"
Asking price $250 MSRP new is $550
CustomSeaLife Velocity Pump T3 77830
Flow Rate at 3 ft: 800 gph
Inlet & Outlet: 3/4" MPT
Asking price $50
Iwaki MD55RLT Water Pump (Japanese Motor)
Inlet(MPT)/Outlet(MPT): 1"/1"
Flow Rate @ 4` Head: 1080 GPH
Max Head ft: 26.9
*Pump does have external rust on back fan cover. Can easily be scraped, primed and painted. Does not effect the performance.
Can be used with external skimmers such as MRC beckett skimmers
Asking price $150 MSRP $350
MRC MR2 Beckett skimmer
This skimmer was my first skimmer that I ran a 120 Gal tank on. It only has one Beckett and would likely need some TLC and mods to get it working again. I matched it up with an Iwaki MD55RLT and it worked wonders as an external skimmer. This would be best suited as a back up skimmer or a tinkering project.
Asking price $50
2 - Coralvue Lumen Bright reflectors w/ mogal sockets
20" x 20" x 9"
Asking price $50 each MSRP $110
CO2 tank with reef fanatic regulator
Integrated 110V solenoid valve
Integrated precision needle valve
Preset working pressure gauge making fine tune easy
Compact and chrome plated body
Compatible with standard US CO2 tanks
Tank and regulator have not been used for a couple years. There is external rust on the tank and regulator but it should not effect the performance.
Asking price $50 MSRP for regulator is $140 alone
Coralife Pure-Flo II 4 stage RO 50Gal unit
All stages would likely need to be changed. I bought as a backup unit but never used. It comes with a Hanna Dual TDS meter. Battery would likely need to be changed.
Asking $50 MSRP $150
36 x 13 x 15-3/4 acrylic 30 Gal RO/Salt mixing tank
This tank was used for auto top off for display. It was also used for a gravity feed saltwater mixing tank to make water changes nice and easy. There is a bulkhead in the bottom for the gravity feed. All bulkheads and float valve are included.
Asking $60
35 x 20 x 15 Custom acrylic sump/refugium
This sump/refugium was made to fit on the inside of a 4' x 2' stand when I had a 120 gal tank. It has a drain compartment that also doubled as a external skimmer feed box. The water flowed into the next compartment along the back wall where it ran through three baffles before entering the return compartment. Along the back wall I also had a small Eheim pump pushing water through a spray bar to the refugium compartment up front. The refugium then overflowed back into the baffle portion before hitting the return. This combo was extremely successful for me when I ran the 120. I'm sure it could be modified if a refugium was not used.
The top is euro braced to incorporate two glass panel tops to minimize evaporation and add a light strip if necessary.
2 - 1" bulkhead holes. One used for the external skimmer in the drain compartment and one for the return.
Asking $100 and it includes the pump. It was purchased for $300 when made.
