Using the 6215.200 pump seperate from the wavebox

[Pseudo69]

Hi,

I would like to know what mounting parts I would need to use the 6215.200 pump from a Wavebox separately in tank. I have all of the other parts except for the magnets and holder.

Can you give me a parts list breakdown so I can order them?

Thanks

 

[rvitko]

The magnet you need will depend on glass thickness-

6105.515 for 1/2"
6065.520 for 3/4"
6205.500 for 1"

You will need the 6065.650 clamp

Please keep in mind that if you run this pump in anything other than wave mode you must either change to the smaller 6105 propeller or the larger 6300.240 power supply, if it is run in longer bursts at full power in stock configuration the power supply will fail as it is essentially a 6155 using a 6105 power supply since it never reaches peak draw when rapidly cycled on and off in wave mode.

 

[Pseudo69]

Roger,

I have a brand new power supply model 09257H that goes up to 24vdc 3.00amps. Is this the correct power supply?

 

[rvitko]

Only for use in wave mode, that is the 6105.240, it cannot support the pump long term at full power, it will burn out.

 

[Pseudo69]

Oh ok. No, I will not be using it at full power. 50% wave mode as a supplementary water movement pump.

Thanks