which fuse is correct??

[EleganceMan]

Running this in USA and wondering which fuse is the correct one? 12v, 18v, 24v?
thanks

 

[rvitko]

For a 6105 you can use 12 or 18V, depending on how strong you want the flow. For a wavebox use 24V and for a 6101 you can use all 3 depeending on the strength of flow you want.

 

[EleganceMan]

yeah i had the 12v fuse in my new wavebox....maybe the 24v will make a difference!!

 

[Harry_Y]

Why can't the 24 v one be used for normal operation?

Is it hard on the pump?

 

[rvitko]

You would essentially be overdriving the pump and the wattage would be higher than rated and this could burn out the pump and or power supply.

 

[Harry_Y]

Thank you

 

[acrohead500ppm]

I sent in my 6101 w a 6210 suction housing in for service a few weeks ago, you found out it was the power supply that went bad, you sent me a new one with those 3 fuses , and I was a little confused , so the bigger the volt rating the higher performance/ stronger flow potential ?

 

[rvitko]

For a 6101, you can use 12, 18 or 24V, you original power supply had the same options, the higher the voltage the greater the flow. For a 6105 you can only use 12 or 18V.