deleau
New member
I have a full Apex system purchased circa 2014 that has been running 4 Radion Gen 3 Pros via the WXM module just fine.
Recently, I replaced my older MP40s with two new MP40QDs. The old MP40s were wireless, but I never attached them to the WXM module; I just controlled their on/off via EB8 and set them manually on their controllers.
I've now got issues with the new MP40QDs. I can successfully attach them to the WXM, and I've been able to make profiles on them via Fusion, and they seem to work fine.
However, after about a day, 5 out of the 6 devices attached to the WXM module (2 Vortechs, 4 Radions) will show missing; the lone device that is still working changes and appears to be random.
To fix this, I have to do the following: delete the outlets for the Vortechs in the classic web interface, reset the Vortechs to factory default, power cycle the WXM module and power cycle the Radions. The Radions will reattach to the WXM, then I have to re-upload their configuration from the Fusion interface.
My WXM is SW Rev 010, Rev 1.14, RF Rev 1.2
The Radions show as Rev 1.7.6
The Vortechs (when attached) show as Rev 255.255.0
Any ideas/suggestions?
Recently, I replaced my older MP40s with two new MP40QDs. The old MP40s were wireless, but I never attached them to the WXM module; I just controlled their on/off via EB8 and set them manually on their controllers.
I've now got issues with the new MP40QDs. I can successfully attach them to the WXM, and I've been able to make profiles on them via Fusion, and they seem to work fine.
However, after about a day, 5 out of the 6 devices attached to the WXM module (2 Vortechs, 4 Radions) will show missing; the lone device that is still working changes and appears to be random.
To fix this, I have to do the following: delete the outlets for the Vortechs in the classic web interface, reset the Vortechs to factory default, power cycle the WXM module and power cycle the Radions. The Radions will reattach to the WXM, then I have to re-upload their configuration from the Fusion interface.
My WXM is SW Rev 010, Rev 1.14, RF Rev 1.2
The Radions show as Rev 1.7.6
The Vortechs (when attached) show as Rev 255.255.0
Any ideas/suggestions?
