1 1/8 inch threaded female cap

[fatty23]

hey guys
i needed to cap a bulk head i 1st bought a 1 1/4 inch cap but was too big then i bought a 1 inch cap and that was too small. the guy at home depot said they dont make 1 1/8 does anybody know where i can get a 1 1/8 inch threaded female cap
thanks
john

 

[DRC69]

What end are you trying to cap ?????
Internal threads are pipe.
Do not try to cap external threads. The threads that the bulkhead nut goes on.

 

[fatty23]

theres a hole drilled on the top coner of the tank and its outside threaded male i wanted to find a threaded female so i can cap the hole

 

[DRC69]

OK. Is it a 1" or 3/4" bulkhead?
Internal threads are??? 1" or 3/4"???
There is a cap for the external threads if it is a 3/4" or 1" bulkhead.
It is a elbow that you can cap off. It's the only one I ever seen for external threads on a bulkhead.
I would change the bulkhead to a thread/slip and cap it off that way.

 

[DRC69]

http://www.dtpetsupplies.com/~dtpetsup/catalog/product_info.php?cPath=503_504_505&products_id=3406