$20 Feed Timer Short and Sweet!

[Avast Marine]

You know what it's for so here we go...............

Start with this.

<a href="http://www.flickr.com/photos/58279226@N00/206864583/" title="Photo Sharing"><img src="http://static.flickr.com/65/206864583_4c3b2bfd3f_o.jpg" width="600" height="449" alt="DSCN0847" /></a>

then pull cover off (I drilled out the screws because I didn't have a small enough star drive bit)

<a href="http://www.flickr.com/photos/58279226@N00/206864584/" title="Photo Sharing"><img src="http://static.flickr.com/60/206864584_53f5c873f3_o.jpg" width="600" height="396" alt="DSCN0849" /></a>

Then drill out two more screws to get to this piece in the middle. Now if you look carefully at the white dial you can see a notch on the right side. This is where the metal spring normally sits. I have already flipped it at this stage to take measurements. You can also see that the sping in this position closes the circuit (on) rather than the normal way when it is sitting in the slot is open (off).

<a href="http://www.flickr.com/photos/58279226@N00/206864585/" title="Photo Sharing"><img src="http://static.flickr.com/63/206864585_bb834b68fc_o.jpg" width="600" height="449" alt="DSCN0853" /></a>

CAREFULLY use a razor blade to trim off most of the dial except where it was resting in the closed (on) position.

<a href="http://www.flickr.com/photos/58279226@N00/206864587/" title="Photo Sharing"><img src="http://static.flickr.com/66/206864587_4d4ab81e89_o.jpg" width="600" height="681" alt="DSCN0860" /></a>

More to come.....................
Don't reply yet please................

 

[Avast Marine]

Now put er back together the same way it came apart. I had to use some supa glue and gorilla tape since I drilled out my screws.

Then I put it in a box and cut a extention cord in half and wired it like so.............

<a href="http://www.flickr.com/photos/58279226@N00/206864588/" title="Photo Sharing"><img src="http://static.flickr.com/67/206864588_bea723248e_o.jpg" width="600" height="449" alt="DSCN0862" /></a>

Slap the cover and stuff on it................

<a href="http://www.flickr.com/photos/58279226@N00/206864589/" title="Photo Sharing"><img src="http://static.flickr.com/63/206864589_d779caea11_o.jpg" width="600" height="449" alt="DSCN0867" /></a>

Yes it say's off when the pump is really on . But hey the timer is acurate wadda ya want?

Finished product. By using the extention cord rather than splicing a pump wire you can plug in whatever you want.

<a href="http://www.flickr.com/photos/58279226@N00/206865457/" title="Photo Sharing"><img src="http://static.flickr.com/64/206865457_b9c41fced5_o.jpg" width="600" height="449" alt="DSCN0868" /></a>

Hanging on my 29.

<a href="http://www.flickr.com/photos/58279226@N00/206865458/" title="Photo Sharing"><img src="http://static.flickr.com/71/206865458_c3e1c4547f_o.jpg" width="600" height="670" alt="DSCN0869" /></a>

Peace.

 

[Freed]

Uh no I don't know what it's for so why don't you tell us. Thanks.

 

[spineshank385]

its a feed timer like the title says

turns off your return pump for a set amount of time so the food doesnt flow into the sump.

Then turns it back on again for you, so you dont forget about it and crash your tank

 

[Avast Marine]

$20 Feed Timer

$20 Feed Timer

Hint: It's in the title.............

Turns off the return pump for up to 1 hour and then turns it back on. So expensive Priscine Energetics MYSIS doesn't become expensive skimmate.

 

[prugs]

Nice picture of that trophy BIG toe nail :lol:

 

[Avast Marine]

<a href=showthread.php?s=&postid=7881095#post7881095 target=_blank>Originally posted</a> by prugs
Nice picture of that trophy BIG toe nail :lol:

How you think I cut down that white dial?

 

[marino420td]

Where did you get that timer switch? Is it available at Lowes or did you special order?

Nice job by the way.

 

[Avast Marine]

Yep, I got it at Lowes.

 

[BeanAnimal]

Nice job dandy

For those who don't like timer surgery, you could wire the timer up to a 120V relay coil. Wire the PUMP to the NC contacts. When the timer is set, the contacts open and stop the pump. When the timer runs out, the coil de-energizes and the pump restarts

 

[Avast Marine]

Thanks Bean, I actually expected there to be a relay inside the box. I was planning for a evening of soldering. I was pleasantly suprised to find the simple spring and dial mechanism.

 

[AcroSteve]

Cool. Definitely good information because this uses the timer that most stores have. Very few have the NC ones without a special order(though they are available).

 

[GROSSR]

You could always use a regular HD Intermatic timer with 1 ON switch. Turn the timer to OFF, spin the dial until you get some resistance, not very accurate, but much quicker and easier. You can plug anything you want into this idea as well.

rich

 

[Avast Marine]

<a href=showthread.php?s=&postid=7885045#post7885045 target=_blank>Originally posted</a> by GROSSR
You could always use a regular HD Intermatic timer with 1 ON switch. Turn the timer to OFF, spin the dial until you get some resistance, not very accurate, but much quicker and easier. You can plug anything you want into this idea as well.

rich

My wife is in charge of feeding this tank.......like she would do that :lol: .

 

[Sanjay]

You could save yourself the hassle and get a Single Pole Double throw timer from Intermatic (FD32HW) , and wire it in the normally open position. here is a link to it.
http://www.intermatic.com/images/catalog/pages/048.pdf

This is what I am using to turn off the main circulation pump when feeding, and have it automatically turn back on in case I forget.

sanjay.

 

[Avast Marine]

<a href=showthread.php?s=&postid=7888463#post7888463 target=_blank>Originally posted</a> by Sanjay
You could save yourself the hassle and get a Single Pole Double throw timer from Intermatic (FD32HW) , and wire it in the normally open position. here is a link to it.
http://www.intermatic.com/images/catalog/pages/048.pdf

This is what I am using to turn off the main circulation pump when feeding, and have it automatically turn back on in case I forget.

sanjay.

Hassle? Seriously it took about half an hour with taking pictures for half the cost of the intermatic timer you linked to.

That said I am going to build another one using a DPDT relay (making it a $23 Feed Timer), because I feel it will be more reliable in the long run (thanks Bean).

 

[Avast Marine]

Alright now the relay version (no cutting or drilling required).

<a href="http://www.flickr.com/photos/58279226@N00/211484268/" title="Photo Sharing"><img src="http://static.flickr.com/63/211484268_e4209c9ac9_o.jpg" width="600" height="449" alt="relay1" /></a>
<a href="http://www.flickr.com/photos/58279226@N00/211484266/" title="Photo Sharing"><img src="http://static.flickr.com/65/211484266_4f5f8e0270_o.jpg" width="600" height="449" alt="relay2" /></a>
<a href="http://www.flickr.com/photos/58279226@N00/211484271/" title="Photo Sharing"><img src="http://static.flickr.com/83/211484271_45c90e902e_o.jpg" width="600" height="449" alt="final2" /></a>
<a href="http://www.flickr.com/photos/58279226@N00/211484270/" title="Photo Sharing"><img src="http://static.flickr.com/86/211484270_66da9716a2_o.jpg" width="600" height="449" alt="ontank" /></a>

 

[BeanAnimal]

I told you it would be easy Relays are your friend, just remember that!

 

[Avast Marine]

Thanks for your help on this one Bean! And yes I bought a couple extra relay's while I was at Radio Shack . Who knows whats next............

 

[BeanAnimal]

No problem... I have a weakness for relays and enjoy making things out of them...

Once built a remote start out of a dozen or so bosch auto relays using the output of an old excalibur alarm. Not pretty, but I did win a bet over the thing. Wheh I used to run a car audio shop (years upon years ago, when tape decks were still as popular as CD decks...) I used to make my installers recite the pin config of those units daily. If I asked a guy to grab a relay and wire a doorlock to the alarm (or anything) and he could not do it after the first week... then he was history. You can use em for anything they are very simple and powerful devices once you get your head wrapped around them (afterall that is what still runs many elevators)