210 Gallon- can I use 6060 or 6080

[fishnugget]

I cannot afford controllers at this time . I cant spend $700 for multicontroller with 2 6100. Do you have any suggestions as to which Tunze steams I can use and get good results. I would put each in opposite rear corners.

Any ideas?

 

[rvitko]

I would probably prefer to slowly build up to the kit. The 6100 would cover the tank and will work without a controller, this gives you the flexibility to do more later. Otherwise you could get two 6080's but just remember you cannot use any wavemakers, timers would be your only option at one hour intervals.

 

[fishnugget]

Only 1

Only 1

Are you saying that 1 6100 would give my 210 good flow at this point.

Where would you position it?

How would it compare to 2 maxijet 1200's?

 

[rvitko]

That is like comparing a 747 to a cessna, I'm being serious. You would eventually want two but one would be ok for a few months, the only draw back is flow would only come form one direction but the 6100 covers 7ft by 2ft by 2ft very well. It should be centered on one side if you are only using one.