6105 w/ apex controller

[s2k]

Hi Roger,

I just bought two new 6105 and the cable adapter so I can control them via my apex controller. Only problem is the connector to the tunze it too loose and doesnt fit. Any recommendations? Is it okay to run the tunze without the controller? I figure it would just be running at the same speed.

This is the piece I got from marine depot.

http://www.marinedepot.com/2_Channe...ories-Neptune_Systems-NS5551-FITEMOAC-vi.html

Thanks!

 

[shawnz28]

Yes you can run it without the controller and you are right will be at one speed. It seems to be something with the connectors Neptune uses as mine are the same way and have heard it from others. I bent my connectors a bit to make them snug but that of course would be at your own risk. Others in the Neptune forum might have other options.

 

[szwab]

Pull the plastic cover back, plug the cable in. It will "click" into place then push the cover back on. Much better fit that way.

 

[s2k]

Szwab - Thank you very much - I got to fit by pulling the plastic back abit.

 

[szwab]

Good to hear!