7091 controller

[nativecracker32]

i just got this set up and it worked well for a couple days. now the controller lights up ups not driving the pump? the pulse light and no. 2 light are both on and kinda pulsing, but it never goes to no1? any ideas or help would be greatly appreciated.

 

[rvitko]

Do you have a photocell connected or is the pulse time turned fully clockwise (pulse off)? If it is neither of these, is it possible salt creep or water entered the photocell socket or foodtimer button? What model pump do you have connected?

 

[nativecracker32]

i bought it used so anything could have happened before i got it? no photo cell. it a 6101 pump and the pulse it turned down to a short burst?

 

[rvitko]

Send it in, but include the pump, it is actually more likely a pump problem.

 

[nativecracker32]

whats the address and how should i label it?

 

[shawnz28]

TUNZE USA LLC
305 Victor St
Austin TX, 78753

Include your name, address, and contact info along with a note of the problem or a printout of this thread

 

[nativecracker32]

thanks!

 

[nativecracker32]

Shawn or Roger, looks like the pump got out there. just give me a shout when you have time to look at it and let me know what went wrong. Also i was wondering if i got the housing for a wave box and put it on there would it work with that controller? my tank is 7' long 24" wide and 30" deep. Thanks for all your help, it's nice to see a company stand by there products!

 

[rvitko]

You would need the 6091 controller and the pump is too small, you would need a 6261 or 6201.

 

[nativecracker32]

roger can you give me a number to call or some way to check on a pump i sent in? just want an update.

 

[rvitko]

The easiest would be if you just PM'd me your name and I could look it up and write you back, phone is 512-833-7546