7095 Flow Confusion, Is the DVD avalible?

[rottielover]

Hi Roger,

First I wanted to thank you again for all your help in the past.

I just opened the box for my 7095 and read the manual twice. I think I'm even more confused about the flow then ever now....

The book references a DVD about flow, is this avalible?


Or maybe you can just tell me the appropriate settings for my setup...

I have a 120 (60x18x24) and two 6000 streams. I would like "wave action" in the tank, and I currently have the two streams mounted in the back corners (brackets mounted to the side walls) pointing to the middle of the front glass.

In the book, it shows two streams mounted to the back wall in the back corners pointing to the front glass but shy of the middle. This shows arrows where current can get around the back of the rock work ?

As always I very much appriciate any advice you can offer, o' ye yoda of the Tunze!

 

[rvitko]

I would use the Interval 2 mode and the positioning you mentioned. Set the pulses at 30% and 100% and 3 seconds apart. I would use a 6hr interval between pumps. So one pump will pulse for 6 hrs and the other will idle and then they will switch off.

The DVD is in PAL format only. We have it in NTSC format on VHS. It is very old and shows the 7093 controller with 7410p pumps. It is useful for some general ideas but the Streams and wavebox did not exist then. We started work on a new video last month and it should be available in May 2006. I know it sounds like a long time but we can't start filming until we have the products in black and we are filming it in 3 countries, it should be 30 to 45 minutes long.

 

[rottielover]

Sounds great, thanks again Roger!