7095 problem

[miracles38]

I bought the 7095 controller a little over a year ago and was using it for 2 6100's. Recently, I started using 4 6100's and have found that the controller only works for 3 of the 4 streams. Any idea's of what I can do? I have tried switching streams, and it is definitely the controller with the problem.
Thanks!
Kim

 

[rvitko]

Have your tried switching cables? It would be very odd for just one socket not to work since 2 sockets would share the same channel.

 

[miracles38]

I didn't switch the cables between streams, but did switch which location it was connected. It was always out of the same socket that doesn't work. Does that make sense

 

[rvitko]

Yes, but it is very odd. Send it to me and if I can't fix it I will replace the board. The most likely culprit is that the socket has a bad solder joint. Please label the bad socket with a piece of tape so I know which one it is.

Tunze USA
305 Victor St
Austin TX 78753

 

[miracles38]

Okay, thank you. I will get it mailed out.

 

[miracles38]

I am just getting this controller mailed out today. Would it be possible for you to also check the night mode? I have never been able to get it to work.
Thanks!

 

[rvitko]

Please include a note that you want me to check night mode function.