75 gallon mixed reef build

Hey fish what are the dimensions of your tank ? Yours is a 75 right what is the LxHxW ??


Sent from my iPhone using Tapatalk
 
Is that measuring outside of the panes of glass ?? And to the bottom of the trim ?? That's how I measured mine ! Mine has to be a 90 or something


Sent from my iPhone using Tapatalk
 
You said yours is 48x26x22

A 120 could be 48x24x25

My guess is it has to be slightly over 100 gallon
 
Last edited:
Drilled the hole to low on the trash can and it leaks so I'm going to get rid of that and use the two drums instead.
 
After mess around with the trash can a bit more I think I'm just going to put a bulkhead on it. Going to save up for a panworld pump. I tested all the rest of the uniseals and no leaks. The trash can is the only thing that gave me trouble was the trash can.
 
Dude that's rough, I know it sounds upid but try putting some silicone between the uniseal,, either between the rubber of the uniseal and the trash can , or the uniseal and the pvc pipe ,, obviously make sure it's dry and make sure to give it ample time to cure and use ge1 silicone or something that you trust in your water !


Sent from my iPhone using Tapatalk
 
I can't find and bumps or rough spots that would make it leak. I tried a new trash can as well. It just drips right at the bottom.









 
Dude GE 1 , silicone that **** !! Make sure it drys abs cure before introducing water or it will leak just rub that around the outside diameter of the uniseal and reinstall ,, make sure it's the GE1 100% silicone , don't use anything with mold resistant stuff


Sent from my iPhone using Tapatalk
 
Are you sure that bulk head will conform to the contours of that trash can ??


Sent from my iPhone using Tapatalk
 
Love what you are doing! I cannot wait to see the complete set up with lights and everything in. I am setting up a 75 g tank and just got so inspired.
 
Back
Top