Apex Android App

[HeneryH]

The app seem to be working fine except for the five minute time difference from app to phone.

Is the time on your apex off by 5 mins? I just take the reported time from the controller and display it.

 

[wvreef]

still unable to get my htc to work....

 

[mth1993]

Works great on EVO 3d

Thank you very much for all your work.

Mike

 

[dad1st]

Is the time on your apex off by 5 mins? I just take the reported time from the controller and display it.

Yes it was, Thanks for pointing out the obvious Henery

 

[HeneryH]

V 0.29 posted to the market with ACiii control support and a first cut at graphing. The graph is currently hardcoded to the first probe that listed in the XML file.

I will obviously be adding the ability to select which probe to graph. Also looking into the ability to overlay multiple probes but the graphing library I an using doesn't support two different y-scales. With the current library, I would have to normalize the second graph to the same range values as the first graph. You could see the shape of the second but the values would be meaningless.

Also, the graphs act strangely if there is no data or all data points are the same so beware if you have only a couple of data points or they are very stable (like exact stable).

 

[dad1st]

Just down loaded the update and yes it does act weird,The graphs flash and roll sporadically when i touch the screen.

 

[HeneryH]

This was my first time with this specific graphing library. I went with it because it was supposed to allow pinch and zoom. I will try to get it more stable.

 

[wvreef]

Ok I need to do a port forwarding on my netgear router so I can use my HTC EVO (sprint customer) to be able to access my apex anyone that can help me with this please chime in on this as I am lost on this

thanks in advance

 

[royvoss]

Henery,
nice jop on the app, it look sweet. can more then one contiler be added. i have an apex and a ac3. when i added the ac3 it give force close , removed the ac3 and it works fine. again thanks for the work your crew put into it.

 

[HeneryH]

Yes, multiple controllers are supported. Should work fine with the ACiii but there is a restriction that there are no duplicate or blank outlet names. Not even "unused" can be duplicated.

Also it has to have a later version of FW that support xml status.

Trying going to your controller with a "/cgi-bin/status.xml" on the end to confirm the XML is supported. Something like http://your.domain.com/cgi-bin/status.xml

 

[royvoss]

are you talking about duplicate names between the controllers or just with in each contoller. ac3 has the lastest firm ware.

 

[HeneryH]

Hmm, good question. I think just within a controller but I need to double check that.

 

[wvreef]

Ok I need to do a port forwarding on my netgear router so I can use my HTC EVO (sprint customer) to be able to access my apex anyone that can help me with this please chime in on this as I am lost on this

thanks in advance

bump for today

 

[RussM]

wvreef: Create a new thread, since your issue is not directly pertaining to the Android app. In that new thread, post screen shots of what you've tried for the port forwarding in the router. Also, post a screen shot of the Apex network settings

 

[insomniac2k2]

Getting immediate FC on my ICS tablet when trying to launch the latest version. Just FYI

 

[dad1st]

android app

android app

I just relixed there isn't a feed cycle in the new appear.
will there be one?

 

[HeneryH]

Dad, yes, I will add that.

Insomniac, I'll PM you to work through it. Have you tried it on a pre-ICS phone yet? I had one report of ICS tablet working but one doesn't make a trend. Wondering if it something specific to your configuration or a more general problem.

 

[dad1st]

Ok thanks Henery.

 

[dad1st]

Ok thanks Henery.

 

[insomniac2k2]

My ICS tab was one of the ones that worked on your first tablet capable release. The newest does not. Im going to remove it and re-DL the app just to make sure in a bit