apex help

[pdnyc69]

my apex display froze today about 7 hrs ago. i tried to access it via my desk top which is directly plugged into the controller. i could not gain access thru "apex" or ip address. i then unplugged it for 1 min and replugged it in. the display appears to not be on now. the controller status lights are flashing yellow. the ethernet connection has a yellow light steady and a flashing green light. the status light on the wxm, vdm, eb8 are all flashing yellow and nothing is working. any help here would be greatly appreciated

 

[pdnyc69]

oh i also upgraded the firmware and webpage to 4.04 bc 10 last weekend

 

[pdnyc69]

ok i went into the unofficial user guide and tried to force a boot loader mode on the base unit by running the apex flash utility then unplugging then plugging in the power supply from the base unit. no good :-(

 

[pdnyc69]

Anyone?

 

[aquamanic]

How was your Apex configured for your network prior to it failing? Was your PC always direct connect to the Apex or did you have some other configuration?

 

[pdnyc69]

I used to use a laptop with a wireless bridge. But I was always able to access it thru both my laptop and desktop. When I uploaded the firmware I did it thru my laptop directly to the base unit but the laptop was wireless. So I'm guessing I corrupted the firmware. I've been working with curt on this but it's going slow because it's the weekend and he's off. This sucks.