I have my email alarm setup to email if PH or temp is out of range and a 60 minute delay on re-emailing. Issue is when the temp is 76.9 or 77.0 it will constantly email. I'm assuming because the temp keeps changing from 76.9 to 77 which triggers the alarm, but skips the 60 min delay. What can I do to change this? is there a wait 10 minutes to try again?
Set OFF
If Power EB8_3 Off 001 Then ON
If Temp > 82.0 Then ON
If Temp < 77.0 Then ON
If pH > 08.30 Then ON
If pH < 07.80 Then ON
If Outlet ontoolong = ON Then ON
If Outlet overflow = ON Then ON
If Outlet Skimmerfull = ON Then ON
If Switchx5_1 CLOSED Then ON
Set OFF
If Power EB8_3 Off 001 Then ON
If Temp > 82.0 Then ON
If Temp < 77.0 Then ON
If pH > 08.30 Then ON
If pH < 07.80 Then ON
If Outlet ontoolong = ON Then ON
If Outlet overflow = ON Then ON
If Outlet Skimmerfull = ON Then ON
If Switchx5_1 CLOSED Then ON