Aqua Surf question

[benf]

<a href=showthread.php?s=&postid=13510782#post13510782 target=_blank>Originally posted</a> by benf
any idea if current is passed along all pins on the plug...i could ck and see if a signal is making it to the transfomer. If it is, then only thing left is the transformer, right?

I meant Driver not Transformer

 

[Deleted member 143833]

It sounds like there is no connection (or the wrong plug is plugged into the wrong pump). The port with the flickering lights should be the one connected to the pump transformer.

I don't know the pinouts, you might need to contact Curt tomorrow.

 

[benf]

While doing these test, i was just using one pump and tried both leads from the aqua surf and same result from both and i can see the led flash for both pumps on the aqua surf. I just reconnected my 2nd pump and same deal..no pulse and thats a 6201 pump using the newer type transformer.

I think the only thing left is for Curt to let me know if there is a way to test the pins to see if i have an actual signal being sent despite what the lights tell me.

 

[benf]

oh,
Thanks Ken!

 

[benf]

So, Curt is there a way for me to test the din pins to see if the signal is being sent? The pump lights flash on and off but the pumps are not responding. I am using 2 different pumps with 2 models of drivers. Neither respond!!

 

[Deleted member 143833]

Best to call Neptune...