AquaC CLUB!
- Thread starter zoltetov
- Start date
- Status
O.G Reefer
New member
New member of the Aqua-C Remora Club
New member of the Aqua-C Remora Club
I just picked one up last night from Makin Waves in Van Nuys, Ca.
Setup was fast and easy.
B.T.W Makin Waves RULES!, by far the best I have ever seen in my 15 years in the hobby. I will give them all of my buisness.
New member of the Aqua-C Remora Club
I just picked one up last night from Makin Waves in Van Nuys, Ca.
Setup was fast and easy.
B.T.W Makin Waves RULES!, by far the best I have ever seen in my 15 years in the hobby. I will give them all of my buisness.
reefez
New member
Difference between EV-200 EV-240?
Difference between EV-200 EV-240?
I got a used Aquac-C form a friend. I think it is a EV-240 but I'm not sure. I measured it and from the specs on the Aqua c page it looks to be a EV-240. But it might be a EV-200. It has no JG fitting, but has the flange on the bottom of the collection cup for quick release. It also has the ball valve for air adjustment. It has the 1 1/2 in. gate valve. Measures 10.75 by 6.75 by 12 in. tall box.. The tube with the collection cup is 6 in. od and 10 in. tall. The skimmer is 26 in. tall with cup.
Just wondering if anyone knows the diffrfence between the 2 for sure. I think it is a EV-240 that someone opted to not have the JG fitting installed. Anyone know? Thanks..
Rob
Difference between EV-200 EV-240?
I got a used Aquac-C form a friend. I think it is a EV-240 but I'm not sure. I measured it and from the specs on the Aqua c page it looks to be a EV-240. But it might be a EV-200. It has no JG fitting, but has the flange on the bottom of the collection cup for quick release. It also has the ball valve for air adjustment. It has the 1 1/2 in. gate valve. Measures 10.75 by 6.75 by 12 in. tall box.. The tube with the collection cup is 6 in. od and 10 in. tall. The skimmer is 26 in. tall with cup.
Just wondering if anyone knows the diffrfence between the 2 for sure. I think it is a EV-240 that someone opted to not have the JG fitting installed. Anyone know? Thanks..
Rob
sherm71tank
Premium Member
can u aqua c fans post some air flow measurements? I had an EV-180 and thought it did a decent air flow but started building becketts and it got lost in the shuffle.
BrokeColoReefer
Hermit
My 180 on my nano on a mag 7 
fantastic4
New member
been running the Aqua C Remora on my 33 g cube for two months now. I must say that I love this unit, it really takes out some nasty smelly stuff. Water is always ultraclean and noise is very low after paper towel mod, but I also noticed that the noice does reduce with time as they have stated. I clean my cup every two days. and do not use any water conditioner, else, your remora will bubble like crazy for hours.
AquaC EV 240
AquaC EV 240
When I first decided to go with the AquaC EV 240 back in May, I said I would post what it looked like when it was up and going. Now that it's October, I think it's about time.
First, I have to say, I would recommend this skimmer to anyone. I would recommend powering it appropriately however. Don't cheap out on the pump. I am using a Panworld 100PX and she kicks. The skimmer has worked great and hasn't let me down.
More importantly, my corals and fish are thriving. The corals I had previously are growing freakishly huge and my SPS frags are starting to take off. Growth has been 1- 1.5" for my acros and 2 -3" diameter for my orange table, in 4 months time. I'm okay with this growth because I don't have a calcium reactor yet (and I could certainly do better with my water changes).
The Panworld 100PX is gated, but I have it fully opened. The skimmer output is also gated and mostly open. The air intakes are open, though I have tried different settings in the past and may again (just because I can).
Just happy to give something back...
Here's the skimmer!!!!
AquaC EV 240
When I first decided to go with the AquaC EV 240 back in May, I said I would post what it looked like when it was up and going. Now that it's October, I think it's about time.
First, I have to say, I would recommend this skimmer to anyone. I would recommend powering it appropriately however. Don't cheap out on the pump. I am using a Panworld 100PX and she kicks. The skimmer has worked great and hasn't let me down.
More importantly, my corals and fish are thriving. The corals I had previously are growing freakishly huge and my SPS frags are starting to take off. Growth has been 1- 1.5" for my acros and 2 -3" diameter for my orange table, in 4 months time. I'm okay with this growth because I don't have a calcium reactor yet (and I could certainly do better with my water changes).
The Panworld 100PX is gated, but I have it fully opened. The skimmer output is also gated and mostly open. The air intakes are open, though I have tried different settings in the past and may again (just because I can).
Just happy to give something back...
Here's the skimmer!!!!
bureau13
New member
I haven't had any problems with Mag pumps...hey some people dose iron for their macroalgae, now you won't have to
If you go this route however, I would opt for the Mag 18. That's what I have, and it works pretty well, but in no way is it overpowered. Generally speaking, it seems that people who are less than thrilled with their AquaC performance are using the low end of the recommended pumps, which the Mag 12 is for the EV-240.
jds
If you go this route however, I would opt for the Mag 18. That's what I have, and it works pretty well, but in no way is it overpowered. Generally speaking, it seems that people who are less than thrilled with their AquaC performance are using the low end of the recommended pumps, which the Mag 12 is for the EV-240.
jds
- Status
