ATI Powermodule Hybrid Club

TRobertson said:
I currently have 2 Gen3 Radions which work, but the fan noise has always driven me crazy. I'm considering switching to 4x39W Powermodule for my 40 breeder.



Earlier in this thread some have mentioned the fan noise on these powermodules to be very quiet, however I assume the fans are variable and can speed up and slow down based on temperature. So I worry those were talking about noise at minimum level, not at max level.



I plan to hang mine, no canopy. I like some shimmer so I suspect I'll keep LEDs at 100% which I would assume will ramp the fan speed to max. How loud are the fans when running at max speed? Do they run constantly or do they run a few minutes then shutdown for 10 minutes?
Click to expand...



The powermodule must be used with the cable hanging hardware. It cannot be used in a canopy. You will bleach your corals if you set the leds at 100%
No, you won't be able to hear the fans when they come on.


Sent from my iPhone using Tapatalk
 
theshaman said:
The powermodule must be used with the cable hanging hardware. It cannot be used in a canopy. You will bleach your corals if you set the leds at 100%
No, you won't be able to hear the fans when they come on.


Sent from my iPhone using Tapatalk
Click to expand...



If properly ventilated I wouldn't see why you couldn't canopy mount (yes there is no provided solution but I could rig something up to hold it in a few minutes) and second I have my LEDs set at 100% all channels and my corals are just fine. For reference I'm running a 24" 4bulb unit hung 6" AWL over a Reefer 170.


Sent from my iPhone using Tapatalk
 
Keith@ ATI NA said:
Glad to hear!
Click to expand...



Keith if I download the new firmware will it wipe the settings connecting it to my router? I haven't had any issues with the fixture tracking time properly after a blackout since I connected it this way. So if this updated firmware only addresses time tracking and wipes my background WiFi settings when installed then I won't install it. I really don't feel like going through the process of connecting it again lol. I must say again I love the ability to run the configuration software on my local WiFi network and I appreciate you helping me through the process.


Sent from my iPhone using Tapatalk
 
Orcus Varuna said:
If properly ventilated I wouldn't see why you couldn't canopy mount (yes there is no provided solution but I could rig something up to hold it in a few minutes) and second I have my LEDs set at 100% all channels and my corals are just fine. For reference I'm running a 24" 4bulb unit hung 6" AWL over a Reefer 170.


Sent from my iPhone using Tapatalk
Click to expand...

How loud are the fans when 100%?
 
Orcus Varuna said:
Keith if I download the new firmware will it wipe the settings connecting it to my router? I haven't had any issues with the fixture tracking time properly after a blackout since I connected it this way. So if this updated firmware only addresses time tracking and wipes my background WiFi settings when installed then I won't install it. I really don't feel like going through the process of connecting it again lol. I must say again I love the ability to run the configuration software on my local WiFi network and I appreciate you helping me through the process.


Sent from my iPhone using Tapatalk
Click to expand...

Yes it will, you are better sticking with what you have. The time management connected to your router is more effective than the change made to the firmware.
 
Having an issue with my 80 watt wifi powermodule. Will turn on, can log in, no lights. Started when I removed the cable from the controller unit last night. Tried the factory reset and still no good.

I'm in Australia so tried to log a ticket with ATI (Europe). Basically their online help is non-existent. Won't even allow me to submit. Getting pretty worried. Unit is only 8 months old.

Sent from my Pixel XL using Tapatalk
 
gandolf8 said:
Just bought a 48" hybrid 4 bulb fixture any one got a good program they like share ?
Click to expand...



I have my leds set to blue plus setting for 10 hours total time. 1 hour ramp up and 1 hour ramp down. The rest of the 8 hours they are at 55% intensity. I don't dim my T5s. They are on at 100% for the 8 hours the leds are on.


Sent from my iPhone using Tapatalk
 
Hey,
I became a happy owner of the 4x54W + 3x75W LED Ati Hybrid lamp. Can you share graphics with settings ?. At the moment the lamp is on the factory settings and I have an impression that the aquarium is overexposed.
 
gandolf8 said:
Just bought a 48" hybrid 4 bulb fixture any one got a good program they like share ?
Click to expand...



I'm running two hr ramps with a 7hr max setting photo period with leds and 4t5's at 100% all channels. For reference I'm running a 4 bulb WiFi unit over a Reefer 170.


Sent from my iPhone using Tapatalk
 
Hi guys
can anyone send me the schedule on which the lamp works. I am user of 4x54W + 3x75W LED WiFi Ati Hybrid lamp
 
Keith@ ATI NA said:
For those of you unsure where to start with your schedule I would highly recommend the default schedule once your bulbs are burned in.
Click to expand...

I have already burnt in the bulbs. Now I am looking for the optimal setting. That why I would like to see how advanced users have set the lamp.
 
jukos said:
I have already burnt in the bulbs. Now I am looking for the optimal setting. That why I would like to see how advanced users have set the lamp.
Click to expand...



I run my 4 bulb unit 100% all channels over a reefer 170 mixed reef. My bulbs are 2 Blue+, 1 Coral+, 1 Purp+ and I run 1 hr ramps with a 8hr peak photoperiod. This setup may not be for everyone though as I run very high light in conjunction with high flow (100x turnover).


Sent from my iPhone using Tapatalk
 
jukos said:
maybe someone could send me a * .json or * .xml file with settings?
Click to expand...


What are you trying to grow, how big is the tank, how deep is it, how high is the unit off the water, etc? My usual suggestion to everyone is just pick something you find visually pleasing with your bulb combo and never touch the settings again. For me that's all channels running at 100% for 8 hrs a day.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

Similar threads

S
Ati hybrid
Replies
2
Views
330
Slenderman
S
S
AI Blade Grow and Glow help
Replies
5
Views
1K
Sermanley
S
ReefPharmer
FS large equip. Bubbleking SM250 skimmer/ ATI dimmable lights etc
Replies
0
Views
374
ReefPharmer
ReefPharmer
Y
ATI power module 10×54w - too powerful ?
Replies
8
Views
741
smatter
smatter
banthonyb71
need to make an emergency build purchase for own personal health
2
Replies
24
Views
2K
dochoot
D
Back
Top