Bubble Master Skimmers more info wanted???

Status
Not open for further replies.
Roland thanks for the info. I've been considering making a diy snapper skimmer using the material these skimmers use instead of a needle wheel, but considering my skill level, it may be worth it to buy the 250:)
I'm looking to skim about 650g, so if one works well I may double up! Even 2 of these should use ~ the same or less watts than a snapper with an air pump.
 
The snapper and the dart use exactly the same pump volute and ao smith motor. The only difference is the impeller. That is what changes the gph and the wattage. I am building a skimmer right now using the dart/snapper pump with DLS material. I put it on a bucket and the foam is incredible with very little turbulence even in a 5 gallon bucket. The bubble master threadwheel is so simple to make it is almost silly!
 
<a href=showthread.php?s=&postid=8300615#post8300615 target=_blank>Originally posted</a> by Roland Jacques
How short is your stand, these are like 21" tall.
Click to expand...

Ahh, great to know. My stand has an inside height of 23". Are all 3 skimmers the same height? Will 23" be sufficient enough to remove the cup? Also, is there a stand pipe? How do you control the water level inside the skimmer if you wanted to wet skim or dry skim? Thanks Roland.
 
There is a stand pipe, But it is stationary and doesnt move.
Theres a dial on the output of the skimmer i read that raises and lowers the water in the skimmer.
Its 21 and a half inches high, and i believe you need 2 inches to remove the cup. If you have 23 it may be just a tad too big.
I ordered mine last monday, I'll know when it gets here.
Hopefully next week!!!
 
Thanks Creetin. I just went to their site and it states you need 55cm for clearance, which is 21.6". This is perfect! I'm talking about the BM 250 btw. Are they in stock at Reefgeek yet?
 
<a href=showthread.php?s=&postid=8301726#post8301726 target=_blank>Originally posted</a> by smjtkj
The snapper and the dart use exactly the same pump volute and ao smith motor. The only difference is the impeller. That is what changes the gph and the wattage. I am building a skimmer right now using the dart/snapper pump with DLS material. I put it on a bucket and the foam is incredible with very little turbulence even in a 5 gallon bucket. The bubble master threadwheel is so simple to make it is almost silly!
Click to expand...
Hey Micheal
After all the effort in making your big NW pump this DLS wheel is a little diturbing, it so easy. Where are you posting your info on it?
 
<a href=showthread.php?s=&postid=8300908#post8300908 target=_blank>Originally posted</a> by tentacles
Roland thanks for the info. I've been considering making a diy snapper skimmer using the material these skimmers use instead of a needle wheel, but considering my skill level, it may be worth it to buy the 250:)
I'm looking to skim about 650g, so if one works well I may double up! Even 2 of these should use ~ the same or less watts than a snapper with an air pump.
Click to expand...
yeah i was going to make one also but these are cheaper than i thought they would be. I still probably will build one, one day in my free time :rolleyes: . But it wont be to save money.
 
Last edited:
maximus, They are supposed to be getting there shippments in soon. I was told i could have my BM250 in 2-4 weeks from greg. Than was a week ago.
I am hoping sooner than later!
 
Thanks Creetin. So the Eheim pumps will not be used, is this correct? They will use those italian pumps which manufacture pumps for Tunze?
 
I cant find where i read that the standpipe was fixed, I could be wrong, I do see a pic with a wing nut on the stand pipe.
Dunno.

944498c23c192b8ddcac4e15d734df82.jpg
 
Yes the ones that are supposed to be the same manf (Sicce) as the new pumps.
This is just what i read in one of the links provided above by roland, and Oliver pritzel said that all of the ATI's would have them . I think he's the owner of ATI
 
Last edited:
I don't want to derail your thread. I have not started a thread on the threadwheel skimmer yet. I have pics of the new skimmer body and a pic of the threadwheel. I guess i need to start a new thread on the project. I am building a replacement for the Tiny Might skimmer as a member on RC bought it from me.

Mike
 
Me TOO! I cant wait to get mine. I have been drooling over the BK's but it was no way economical for me to get it.
Now i am not so depressed.
Maybe one day i'll have a BK, But now i dont feel like i am left out.
LOL
 
Has anybody heard from greg when they are coming in?
Roland did he say there was 2 shippments? He told me he had a large shippment coming in.

I just emailed him, and i guess i am in the first wave as long as they get their skimmers they ordered.
 
Last edited:
I placed my pre-order with Greg this morning and he stated that they could be in within the next 2-4 weeks. He really didn't know himself. He did say that he should be gettting enough to fill all pre-orders. I hope that's true!
 
Me too, From what i seen on pics and vids they are amazing! If they get 90 scfh they are gonna rock! I thought 45scfh was da bomb with my beckett.

From what i heard theres a reaon why the ditched ehiem pumps.
;)
 
Last edited:
Status
Not open for further replies.

Similar threads

E
innovative Marine AIO 60 Gallon skimmers?
Replies
8
Views
308
Agent Kooper
A
M
Can I use 2 bubble magus qq2 in my tank?
Replies
3
Views
195
Guygettnby
Guygettnby
S
Novice Aquarist - Sump & Equipment Questions
Replies
9
Views
396
wvned
wvned
Broken reefer
Skimmer
Replies
7
Views
765
wvned
wvned
K
upgrading tank and need more info
2
Replies
27
Views
3K
wvned
wvned
Back
Top