Building my Dream: It's a Miracles!

Yayy, more plumbing adventures to come. Just acquired a undrilled 180 and stand dirt cheap. Will be connecting it to my 125 sump and two 40 breeder fuges. Theres app 90 gallons TWV in my 125 so that will be
180+90+40+40=350 gallon sump/fuge added to my 344 DT. Yes im addicted.
 
We shall see. If my skimmer was producing cr*p 24/7 then i would say no but it is not. Theororetically, i will have less need for the skimmer as i will be increasing my fuge size 4 times and i may experiment with algae scrubber.
 
UPDATED VIDEO

<iframe width="560" height="315" src="http://www.youtube.com/embed/YlgOnr4_F8U" frameborder="0" allowfullscreen></iframe>
 
Your tank is amazing and very similar to what I plan on doing. I enjoyed the build process very much and learned a lot as I am shopping for larger rimless tanks. However, I think i am sold on eurobrace since these larger rimless tanks scare me (especially ordering from canada). I might go with coast to coast aquariums as they are closer and i can always inspect the product.

This is my opinion regarding your aquascape. The larger piece on the left, you will eventually regret it being put in there - later down the road when it's encrusted overgrowing with 100's of animals. It's way to overpowering and you only need a small area for corals footing (leaving them air space to grow up).. For your tank's height your corals will grow to the waterline very quickly. It's also giving way to much shade to the substrate below it making it a low par zone and you'll have to put corals that need low light.

I think besides this piece everything else is great. I would just decrease the height somehow. We reefers love symmetrical, but in a real reef nothing is symetrical. I recently removed about 40% of my LR and my tank is crystal clear and free of aiptasia as I can get to them better. I noticed these improvements from removing rock: no more detrius/ deadspots, better flow, smaller fish/ inverts stopped disappear from my view, Pest become controllable, tank looks larger, I dont want to add more corals then I need, etc.
 
Your tank is amazing and very similar to what I plan on doing. I enjoyed the build process very much and learned a lot as I am shopping for larger rimless tanks. However, I think i am sold on eurobrace since these larger rimless tanks scare me (especially ordering from canada). I might go with coast to coast aquariums as they are closer and i can always inspect the product.

This is my opinion regarding your aquascape. The larger piece on the left, you will eventually regret it being put in there - later down the road when it's encrusted overgrowing with 100's of animals. It's way to overpowering and you only need a small area for corals footing (leaving them air space to grow up).. For your tank's height your corals will grow to the waterline very quickly. It's also giving way to much shade to the substrate below it making it a low par zone and you'll have to put corals that need low light.

I think besides this piece everything else is great. I would just decrease the height somehow. We reefers love symmetrical, but in a real reef nothing is symetrical. I recently removed about 40% of my LR and my tank is crystal clear and free of aiptasia as I can get to them better. I noticed these improvements from removing rock: no more detrius/ deadspots, better flow, smaller fish/ inverts stopped disappear from my view, Pest become controllable, tank looks larger, I dont want to add more corals then I need, etc.

Thanks for the input. Coast to coast is very close to me, actually grew up in that town and could have inspected tank often. However, their cost was out of my league. I dont believe their is any other tank manufacturer more expensive. The huge pieces are overpowering, i couldnt believe how much room 160 pounds of pukani took up in the tank. However, i am happy with the results and am going to work around the height restrictions. For example, only encrusting corals such as war coral, acans, zoas, palys, etc will be on top of the large structures. As for the shaded areas, they provide an area for lower light corals, its not a negative. This area also provides an area of retreat from the lights for certain fish species. Also, below that left structure is an open tee pee shaped cave. In the cave is a bonded pair of cleaner shrimp and this has become my cleaning station.
 
Warning

Warning

Well reef experienced another mistake. I have had my predatory snail eating crown conch for months now and had never bothered my deresa clam. This morning found the clam closed up tight but the conchs thingy apparently inside. I detached the conch and removed him to the fuge. I believe the clam is dead but uncertain.
 
Not dead but very stressed. Fingers crossed. Dosed him with phyto and vitamins
37FBF587-F424-4991-90AF-996F971E6502-1942-0000021C6D1D6C47_zps49f6dca5.jpg
 
I did it the wrong way! Turned off pump and allowed mixture to drop from the eye dropper into clam shell. I never target fed the clam before but thought it was a good idea for the hurting clam. Wont be doing that again. Thanks for the heads up. My clam expert friend confirmed what u heard.
 
Some major plumbing work forthcoming. Recently acquired a non drilled 180 and stand for $100 and a 60 gal frag tank for $20 that i will be connecting to main system.
 
Read through the whole thread again and must say this is a wonderful build, and am now considering a 4' 120 made by miracles. I had a couple questions in regard to your system. Does that gas bubble mess with you anymore at this point in the build or is it now overlooked? And given the amount of $$$, time and effort you've put into the system have you thought about putting a controller like the Neptune Apex on the tank for added controllability and safeguards?
 
Read through the whole thread again and must say this is a wonderful build, and am now considering a 4' 120 made by miracles. I had a couple questions in regard to your system. Does that gas bubble mess with you anymore at this point in the build or is it now overlooked? And given the amount of $$$, time and effort you've put into the system have you thought about putting a controller like the Neptune Apex on the tank for added controllability and safeguards?

The gas bubble at the surface, if it was just the gas bubble in of itself would most likely be of very little concern and hardly noticeable, as it would look like just a speck of dust. However, when miracles came to home to attempt to remove it, they caused distortion in the glass due to applying too much friction which caused heat to build up. I only notice it when viewing at certain angles and it doesnt bother me. The common person viewing tank never notices it.
Regarding a controller, i will be soon be adding a triple pump doser for the soda ash, calcium and magnesium from brs.

In hindsight, if i was to start all over again i would have gone taller with eurobrace. I absolutely love the rimless, but after losing some prized specimens due to jumping, keep a cover on tank unless im showing the tank off to visitors.
I would have also gone with a coast to coast external overflow box. The internal boxes take up alot of real estates and due to plumbing, make covering the tank with custom built netting that much more difficult.
 
Sorry about your male BT. I think on the build I do with them I'll have them install a small lip a half inch or so below the top so I can conceal one of BRS's clear mesh screens. Along with overflow holes for a bean animal overflow and 1-2 returns. Just have to wait to save the $$$ lol
 
July 7, 2013

July 7, 2013

Happy Birthday. One year ago today pumps started on this beuty. Maturing nicely, though slowly. Details and pics to follow.
 
Just wanted to share some great news. First a bit of history; i obtained a pair of pajama cardinalfish for free before christmas. They have always stuck together but in recent weeks have been very elusive, often only periodically sseing one and rarely both at same time-to the point that i thought i lost one. Tonight, i observed both together and up close. One of them reminded me of Jay Leno. A quick internet search confirmed this is a mouth brooding species where the male holds the eggs in its mouth until they hatch.
 
Back
Top