CadLights 34g Mini-II ZeoVit

Kaifers said:
Is this a good tank for someone just wanting to get started in the hobby? Thinking of doing a FOLW for 6-9 months than maybe adding corals as I gain exp.
Click to expand...

You could do what ever you wanted with this tank, its versatile, and you can hide the cad skimmer in the back very nicely for a stealth factor....
 
Cant wait to see this Acan turn into a colony!

14533760347_88bfbf1bda_b.jpg

​
 
I just got a Cadlights 34g mini-II, mostly because of seeing what great stuff you're doing with yours! Your tank is gorgeous!
 
frkysl said:
Hey Looks great,
Can you give us the list of your current setup.

Thanks
Click to expand...

Here ya go!

..::Equipment::..
CAD Lights 34g Mini-II Aquarium
ATI Dimmable Sunpower 4x24w T5
-F- B+ // C+ // KZ-SB // C+ -R-
EcoTech Marine VorTech MP10ESw
Tunze Turbelle nanostream 6015.000
CAD Lights PLS-50 Pipeless Nano Skimmer
Tunze Osmolator Universal 3155.000
Cobalt Neo-Therm 100w Heater
BRS RODI w/ Spectrapure CSPDI System Kit & Dual DI
Red Sea Blue Bucket (First batch Sunday, been on Reef Crystals)
Bubble Magus BMT01 Dosing Pump
--with ESV Bionic 2 Part--

Korallen-Zucht Pohl's Xtra
Korallen-Zucht Sponge Power
Korallen-Zucht Pohl's Coral Vitalizer
Korallen-Zucht Amino Acid LPS
Korallen-Zucht Amino Acid High Concentrate
Korallen-Zucht Coral Snow
Korallen-Zucht ZeoBak Microorganism Solution
Korallen-Zucht Pohl's B-Balance
Korallen-Zucht Pohl's ZeoLife
Korallen-Zucht Activated Carbon
 
Okay, total random question. But in the back aio part of the tank do you have an odd floating wall? Like there's the overflow chamber then there's a piece of glass suspended with a gap beneath it, I assume as the place where the skimmer is supposed to attach to. But does yours not touch the ground? Does it serve any purpose other than to attach the skimmer?
 
kitkat717 said:
Okay, total random question. But in the back aio part of the tank do you have an odd floating wall? Like there's the overflow chamber then there's a piece of glass suspended with a gap beneath it, I assume as the place where the skimmer is supposed to attach to. But does yours not touch the ground? Does it serve any purpose other than to attach the skimmer?
Click to expand...

There is a direct correlation between the glass that holds the skimmer and the water level in the rear chambers. It doesn't need to touch the bottom. The baffle you hang the skimmer on allows it to be hidden from view. The final baffle height is designed around the consideration of the skimmer pump depth while hung from that bracket. So I personally set my skimmer height first then set the ATO.



Sump AIO by J.L Photography, on Flickr


Untitled by J.L Photography, on Flickr
 
Okay, just checking that it's supposed to be that way. I'm not using it to hold my skimmer, so I couldn't see any other purpose for it.
 
kitkat717 said:
Okay, just checking that it's supposed to be that way. I'm not using it to hold my skimmer, so I couldn't see any other purpose for it.
Click to expand...

You're wasting space if you don't use the bracket. You always want to make the most out of the space you have in these all in ones.

Go with what works best for you though...
 
Well my issue is I'm supposed to have the bio pellets before the skimmer. Are you using filter floss in the first chamber?
 
You must log in or register to reply here.

Similar threads

C
F/S CADLights 34G Mini-II and 6x24 Sunpower
Replies
13
Views
2K
Rodmad
R
C
The Upgrade - cchsoracle's ULNS CAD 34G Mini
2
Replies
21
Views
6K
cchsoracle
C
E
CAD 34 mini-II Build
Replies
8
Views
4K
moondoggy4
M
falcona2552
34G Mini II
2
Replies
26
Views
3K
falcona2552
falcona2552
lewisw1
My Innovative Marine 40g nuvo tank build!
2
Replies
21
Views
7K
lewisw1
lewisw1
Back
Top