Calcium Reactor Question

[taichimaster]

well,
my reactor was working fine yesterday. I decided to add a ph probe. I turned off the pump, opend up the lid, and added a ph probe. afterwards, when I turned it back on the chamber became a snow storm. This only happens when the effluent line clogs. anyways, I turned of the solenoid and opened up the effluent valve. I thought this would release all the pressure. It has been 8 hours now and there is still a snow storm inside my chamber. any thoughts?

 

[HighlandReef]

is anything coming out of the effluent?
maybe easier just to run to HD and get new line if its clogged, if thats the problem

 

[taichimaster]

No, the effluent is running full throttle. Effluent line is fine. Just can't figure out why the chamber is still cloudy and the "ph" is still reading 6.00 in the chamber.

 

[108reefer]

if the ph is reading 6.00 in the chamber - the "snow" is your melting media IMO

 

[taichimaster]

Yeah, I know....I already turned of the Solenoid last night and opened up the effluent line to relieve the pressure. Is there anything else I need to be doing?