Nice planning and thank you for the kind words! It sounds like what I did to waterproof my stand . I think it's a white pvc shower liner. It's easy to clean and looks great.
Cheers mate, correct me if I'm wrong... I will use this for the metal its the best of the best... its the stuff that councils use to paint lamp posts :reading:
And i thought i use bathroom paint as they are gloss and designed for wet rooms but through research i found below which i order 5lts!!
and this is the description of it
ASK POND PAINT is a water based epoxy coating designed to give easy and safe application. It is applied in the same manner as ordinary emulsion paint with the added benefit of application in damp conditions. Once dried ASK POND PAINT leaves a tough, non toxic, waterproof, easy to clean surface coating.
Uses
For all concrete pond surfaces and aquatic features.
A general waterproofing coating.
For application to damp surfaces where other paints
cannot adhere.
Curing
Tough cure in 4 hours "“ hard dry in 12 hours "“ maximum cure 8 days.
Once cured can withstand pressure washing, steam cleaning and washing with sterilizing liquids.
Packaging
Two part product which when mixed gives 5 litres,2.5 litres and 1 litre. Clean, easy to use, recyclable packaging.
Coverage and storage
Coverage is approximately 7 square metres per 1 litre. This may be reduced on rougher more porous surfaces.
Store in cool, dry conditions in original tins. Protect from freezing.
Shelf life of 12 months.
Cleaning equipment
If using spray equipment, rinse thoroughly with cold water
frequently to avoid build up of cured paint. Brushes and rollers should be washed in cold water and mild detergent.
Application
A two part product"“ simply mix pack B into Pack A stirring continuously and add water to fill line.
As easy to use as ordinary emulsion paint, apply using a brush, roller or spray. 2nd coat should be applied as soon as 1st coat is touch dry.