CD's upgrade!!!

SCORE!!! An electrician buddy of mine came over this afternoon & wired me in 2-20 amp breakers specifically for my tank. 1 is for the lights & a few outlets the other is for outlets under the tank. Had him wire 2 outlets under tank to switches. 1 for return pump & the other is for the skimmer. No more unplugging for maintenance, just flip a switch!!! [emoji16][emoji106]
Also moved 150 gallon tank into garage so I can attempt drilling it tomorrow. Hopefully it goes good & I don't shatter the glass. I'm going to use a new 45mm diamond hole saw I purchased. Fingers r crossed.


Sent from my iPhone using Tapatalk
 
Well the tank didn't break on me, so I was able to drill my hole & do the plumbing for my refugium.
8879284bbec4eb21a1d2eba71a67db7f.jpg
20161120/9400f02db54a58f54ecfdd8ca684a2d8.jpg[/IMG]
Now I'm going to build a stand to go over refugium to hold my water mixing tanks.
It is pretty nice to have an abundance of outlets to use rather than power strips.
18ba86be917b9e81f11ec3fe7e39f80e.jpg

I have a brand new Reef Keeper Elite somewhere that I was going to use on my current tank but never did. Going to locate it & try to figure out how to use it. Hopefully it's pretty simple. [emoji4]


Sent from my iPhone using Tapatalk
 
Kessil makes some grow/plant specific LEDs if that's your style.. D2Mini used a halide specifically built for that over his macro on his 220 build... Generic "plant/grow" LED panels (Mars aqua and others) that seem to have good wavelengths out there too.

Sent from my XT1575 using Tapatalk
 
It's finally about time....took 5 days for the tank to clear up after sand, rock & water. Temp is up to 78.4.
4533d3f3f61c333948f55d408f3f8337.jpg

Hopefully I can transfer everything from my current tank to new one tomorrow!![emoji4]

I got the stand built for my mixing station & got it all plumbed together. 100 gallon fresh & 40 gallon salt.
10fcdc7ebdfa6d07589e5410d92d4726.jpg

It's all starting to come together!!! [emoji106]


Sent from my iPhone using Tapatalk
 
iced98lx said:
Kessil makes some grow/plant specific LEDs if that's your style.. D2Mini used a halide specifically built for that over his macro on his 220 build... Generic "plant/grow" LED panels (Mars aqua and others) that seem to have good wavelengths out there too.

Sent from my XT1575 using Tapatalk
Click to expand...



Thanks iced. Will definitely check into some fuge lights. Probably going to go with 2 separate fixtures rather than 1 long one.


Sent from my iPhone using Tapatalk
 
That tank is going to look very smart once it is up and running. Not too sure about that couch in front of it, though. The couch should be turned around facing the other way, I think.

Dave.M
 
Dave. M... lmao. [emoji4]. Yes the couch is goin to the basement and will be replaced with a couple of chairs to kinda make it a formal sitting room as soon as you walk in the house. I've kinda turn the front room into a fish exhibit!! [emoji106]


Sent from my iPhone using Tapatalk
 
Today was a pretty productive day...I got everything transferred. Fuge is up & running, just gotta get some lights & macro in it. But I'm sure all the bacteria from sand & rock from my old setup won't hurt anything. Hopefully it still looks good come morning. [emoji4]


Sent from my iPhone using Tapatalk
 
I'm not seeing how the water is going from your fuge to your tank, is it a siphon? If so, what's to stop it form overflowing if your return pump fails? it looks like all the water would overflow from the fuge
 
HAPPY THANKSGIVING!!!!

Vikinglord--my fuge is fed by one of my overflows on that side of the DT. There are 2 ball valves to control the water-either to the fuge or to the sump. It then enters the fuge on the far side. The return part of the fuge is a homemade baffle of a sort to keep macro from leaving then gravity fed into return portion of sump. So if the return pump fails there will be no more water introduced into the fuge.
0d8d61c022ccb3da683750fbfb7b41f7.jpg
dont mind the wires.
76cb259be484e32995b280dff7e68739.jpg
entering the fuge
ce73de61a0cb00b69f28f49bfcf53bb6.jpg
return gravity fed baffle
d57a645a1f01e50fd3e510e70c52f1ff.jpg
back to sump by return pump.


Sent from my iPhone using Tapatalk
 
Well it's up & running.
dc84f71cc183495aa0ef74fbb60aaac0.jpg

Now definitely time to restock. Between a bigger tank & the loses in my old tank, this new set up is pretty empty. But atleast what livestock was left is doin pretty good in the new environment. [emoji106]


Sent from my iPhone using Tapatalk
 
Haha. She says she is still on board as long as it is out off the way and it's automated whenever I travel. It was supposed to be February but now looks like we'll be moving around May.

Sent from my SM-J320V using Tapatalk
 
You must log in or register to reply here.

Similar threads

D
Structural support for 125 gallon aquarium
Replies
7
Views
238
ddang
D
M
Hurt carpet anemone (NEW USER PLEASE HELP)
Replies
3
Views
127
OrionN
OrionN
Guygettnby
Nyos 220 on a 120g?
Replies
8
Views
453
Guygettnby
Guygettnby
M
Do I need to take the glass apart on 300 Gallon glass tank
Replies
3
Views
407
griss
griss
B
Getting back into reefs after a decade away.. Questions
Replies
3
Views
197
Dustin07
D
Back
Top