clowndude
New member
So after having a 65 gallon and being limited by space the time has come to upgrade. In the middle of getting custom tank quotes, a local reefer put his tank up for sale. Tank is a 60x27x27 with center overflow. The deal was to good to pass up. I put a deposit on the tank and will be picking it up hopefully this Sunday. Tank is built by DSA(Deep Sea Aquatics) with custom cherry stand and canopy. I'm still debating whether or not to use the canopy or not and if I do it will be suspended
Equipment list
-2xEheim 1260 return pumps
-RKL to controller water heaters and lights [Currently have]
-1/4 JBJ Chiller [Currently have]
-Coralife turbo twist UV 6x
-Vertex Alpha 170 [Currently have] Plan to upgrade this later to a ATB 200 Elegance
-Lighting will consist of 2x400 watt radiums run in lumen bright and 4x80w T5s
-Bubble Magus Doser
-2xVortech MP40s with backup battery
-Custom built sump with built in two part containers ,reservoir and refug area which I will run miracle mud in

Other Projects:
-There is a closet behind where the new tank is going that will fit water containers. I'm going to use it to hold two water containers. One for RO/DI and the other to store premix saltwater. The RO/DI will have a line that runs into the reservoir with a float and a valve. I'm not going to leave this valve open as I have read and heard to many horror stories about salt tanks being made fresh.
-I've always hated the look of all the electrical wires so I decided I'm going to build a slide out electrical panel under the stand. I'm also going to use a wire management system to run all the wires in. Hopefully this will solve seeing all the millions of wires.
More updates to come as equipment comes in and as I get the tank
Any comments or suggestions are always welcome
Equipment list
-2xEheim 1260 return pumps
-RKL to controller water heaters and lights [Currently have]
-1/4 JBJ Chiller [Currently have]
-Coralife turbo twist UV 6x
-Vertex Alpha 170 [Currently have] Plan to upgrade this later to a ATB 200 Elegance
-Lighting will consist of 2x400 watt radiums run in lumen bright and 4x80w T5s
-Bubble Magus Doser
-2xVortech MP40s with backup battery
-Custom built sump with built in two part containers ,reservoir and refug area which I will run miracle mud in

Other Projects:
-There is a closet behind where the new tank is going that will fit water containers. I'm going to use it to hold two water containers. One for RO/DI and the other to store premix saltwater. The RO/DI will have a line that runs into the reservoir with a float and a valve. I'm not going to leave this valve open as I have read and heard to many horror stories about salt tanks being made fresh.
-I've always hated the look of all the electrical wires so I decided I'm going to build a slide out electrical panel under the stand. I'm also going to use a wire management system to run all the wires in. Hopefully this will solve seeing all the millions of wires.
More updates to come as equipment comes in and as I get the tank
Any comments or suggestions are always welcome