dali problems

[robcampman]

hi, i have wired my dali system. The profilux recognizes the card, but it doesn't give me any options in 4.06 firmware.

The lights are now at full illuminity.

I have wired te 2 da channels with copper-wire in the lamp, I used a wire-nut to connect the two sets of DA channels from two double-45watt-ballasts ( osram qti dali 54w). da- 2x and da+ 2x resulting 2 wires going to the dali-expansiocard.

What can go wrong resulting in profilux not recognizing my ballasts? is it the speakercable i used?

Can someone from profilux gie me a proper wiring diagram, and a illustrated walkthrough maybe?

 

[robcampman]

sorry, i got a little restless when it didn't work immediately.

The Ballasts do work now. i can dim the light on the proficontrol program.. Only 2 wires exiting my pendant.

But i hope someone can help me addresse
ing light channels..

I have 2 ballast of 2x54watt. 4 lamps total..

On the profilux i stated lamp 1 is I1, and lamp 2 is I2. Assuming lamp 1 is actually one total double ballast of 2 x54watt, dimmed simultaneously. i have osram qti dali ballasts, is it possible i can control every single tube with it?

 

[AQD_ottawa]

go to www.aquariumcomputer.com/forum you will get all the assistance you need