Jaculus
New member
Ok now I have your attention. lol
Currently I have two 120 gal display tanks (one FOWLR with some softies, and the other a full Reef). I have a 125 gal Sump/refugium in my basement for both display tanks. I have a HUGE SWC 250/2 skimmer, and a huge area of the sump setup running three large 6500K CFL Floodlights growing a ton of Calurpa varieties and then a Mag 12 pump feeding four BRS Canisters (one bio pellet, one Carbon, and currently two running GFO since I am having a small PO4 spike). Then a Pan World 250 pump as my return pump going through a large Lifegard UV back into the display tanks.
I used to have a poorly setup deep sand bed in my reef tank when it was a 75 gal tank. I have since moved into a 120 gal and used some rock from my old tank and mixed in with a bunch that some of you have seen that I bought from Paul West from West Mariculture. I only have a shallow bed now using more coarse sand.
His discussion at the last Csea meeting led me to thinking I needed to move my DSB into my refugium now. I have started my own research on it and determined that I am going to START moving towards this DSB in my refugium and removing the reactors over time by reducing the flow in those while the DSB gets up and running. I am also going to make a LARGER scale DIY algae scrubber.
I am just LOOKING FOR LOCAL reefers that might have done this or have been running a DSB in a refugium and also made the move away from the need for reactors and possibly so much demand on a skimmer.
I am looking for very specific experience with this rather than the "dont use DSb because it crashed my system" or similar responses. I have learned through reading the science of it that there are reasons for that including some that leaned on the DSB filtering before it had been aged and setup properly to accomadate the filtering needs of an existing system
Currently I have two 120 gal display tanks (one FOWLR with some softies, and the other a full Reef). I have a 125 gal Sump/refugium in my basement for both display tanks. I have a HUGE SWC 250/2 skimmer, and a huge area of the sump setup running three large 6500K CFL Floodlights growing a ton of Calurpa varieties and then a Mag 12 pump feeding four BRS Canisters (one bio pellet, one Carbon, and currently two running GFO since I am having a small PO4 spike). Then a Pan World 250 pump as my return pump going through a large Lifegard UV back into the display tanks.
I used to have a poorly setup deep sand bed in my reef tank when it was a 75 gal tank. I have since moved into a 120 gal and used some rock from my old tank and mixed in with a bunch that some of you have seen that I bought from Paul West from West Mariculture. I only have a shallow bed now using more coarse sand.
His discussion at the last Csea meeting led me to thinking I needed to move my DSB into my refugium now. I have started my own research on it and determined that I am going to START moving towards this DSB in my refugium and removing the reactors over time by reducing the flow in those while the DSB gets up and running. I am also going to make a LARGER scale DIY algae scrubber.
I am just LOOKING FOR LOCAL reefers that might have done this or have been running a DSB in a refugium and also made the move away from the need for reactors and possibly so much demand on a skimmer.
I am looking for very specific experience with this rather than the "dont use DSb because it crashed my system" or similar responses. I have learned through reading the science of it that there are reasons for that including some that leaned on the DSB filtering before it had been aged and setup properly to accomadate the filtering needs of an existing system