drummereef's 180g in-wall build

[psteeleb]

I have looked at the Cad Lights reactor online. I think what Pete was saying about it was that it's more diverted flow vs total control, from a design standpoint. A true recirculation would allow separate effluent control, which I don't think it has.

from the link earlier I did not pick up it has a built in pump, their design should work well. It still does not have individual control on both recirc and thru put but now that I've seen the pump in the video it looks like a good design.

What Brett is designing will have full control on both

 

[drummereef]

What Brett is designing will have full control on both

That's what I'm shootin' for.

 

[henrystyle]

if you don't see them in the regular pipe section of the hardware store, check the sprinkler supply section; they look like this:

check out www.flexpvc.com
If they don't have it, no one else will.

 

[Taqpol]

check out www.flexpvc.com
If they don't have it, no one else will.

Just another shout out for www.flexpvc.com . They have such an amazing selection of various flexible pvc, pvc fittings, and true union/single union ball valaves it is amazing. It takes a bit of time to get used to their website and ordering process, but its worth it in the end.

 

[drummereef]

check out www.flexpvc.com
If they don't have it, no one else will.

Just another shout out for www.flexpvc.com . They have such an amazing selection of various flexible pvc, pvc fittings, and true union/single union ball valaves it is amazing. It takes a bit of time to get used to their website and ordering process, but its worth it in the end.

Thanks guys. :thumbsup:

 

[drummereef]

UPDATE:


Couple of upgrades came today. I was getting a small amount of stray voltage, about ~15v, and was finally able to pin it down to my two Theo Heaters. I don't know specifically if they were leaking or if they just weren't insulated very well, but in any event the meter was showing excess voltage. I had felt small tingles on occasion in the past when they were ON, so I decided it was time to take care of it. Out with the old, in with the new!

This time around I went with two Eheim-Jager 250 watt True Temp heaters. I also picked up two 1/2" Uniseals for the reactor mod project. And a new reagent refill for the Hanna Alkalinity Checker.

 

[drummereef]

UPDATE:


The valve for the reactor mod came today. I went with a 1/2" George Fischer Type 375 True Union Ball Valve. The handle is very easy to adjust and it looks to be extremely well made like the other GF products I've used. Just need to pick up a couple fittings locally and some pipe and I can mock up the plumbing.


GF Type 375 True Union Ball Valve

The size of this 1/2" valve is fairly small. Here's a size comparison with my iPhone so you can get an idea of how small it is.

 

[iwishtofish]

Those are the only heaters I would ever buy, now. They seem to last longest. I did get credited for one (Drs F&S, of course) because I noticed water condensation inside. I had it fully submerged, as I do the second one.

I had tried to contact Eheim through the website help form, and never got a response, btw.

 

[drummereef]

Those are the only heaters I would ever buy, now. They seem to last longest. I did get credited for one (Drs F&S, of course) because I noticed water condensation inside. I had it fully submerged, as I do the second one.

I had tried to contact Eheim through the website help form, and never got a response, btw.

Indeed. I had some condensation in the both of the Theo heaters I was using. I called Hydor and they said it was "normal" but I had my doubts. I let it go for a few months but the problem didn't seem to get better and/or the tingling in my fingers when feeding the fish etc...

I've used Jager heaters in the past without issue, so I'm hoping these will last a while. I will say jumping up to the 250 watt, they are significantly longer in size than the 200 watt. But considering the tank is in the basement that stays relatively cool all year they seem to be doing a better job keeping the tank temp more regulated. I have the Apex set to a 0.5 degree swing and they are keeping it right there. There's a slight bump when the lights are on but it's only ~0.5 degrees off my heaters - so about 1 degree total per day.

 

[mess7777]

I can't believe that I never read through this thread before after seeing on the front page so many times!

Amazing build sir.

Your patience is incredible, not many of us can take it that slowly....may I add this is way we all should do it.....it would save a lot of coral and fishes lives!

Also, your DIY skills are unmatched. I only wish I had the capability of doing projects like you have done in finding solutions. Attention to details and also keeping things aesthetically pleasing in the meantime.

Your corals are looking really good, once things start to fill in it will be awesome.

I saw also that you are thinking of adding a leopard wrasse. I am sure you already know but don't do this until you have a healthy pod population and a very established "ecosystem". There is good information in the fish primer series on this site.

Thanks for sharing with us, your work is inspirational....if pete hangs out here a lot you must be doing something right!

 

[drummereef]

I can't believe that I never read through this thread before after seeing on the front page so many times!

Amazing build sir.

Your patience is incredible, not many of us can take it that slowly....may I add this is way we all should do it.....it would save a lot of coral and fishes lives!

Also, your DIY skills are unmatched. I only wish I had the capability of doing projects like you have done in finding solutions. Attention to details and also keeping things aesthetically pleasing in the meantime.

Your corals are looking really good, once things start to fill in it will be awesome.

I saw also that you are thinking of adding a leopard wrasse. I am sure you already know but don't do this until you have a healthy pod population and a very established "ecosystem". There is good information in the fish primer series on this site.

Thanks for sharing with us, your work is inspirational....if pete hangs out here a lot you must be doing something right!

Thank you very much mess7777. And yes, I'm grateful to have Pete join us here on a regular basis. :thumbsup:

 

[drummereef]

UPDATE:


The rest of the reactor mod plumbing parts came in yesterday. So finally I have everything needed to rough out the plumbing for the project. I ended up ordering all of it from US Plastics since the selection of schedule 40/80 gray fittings are somewhat limited at the local Lowe's. US Plastics had everything needed with very competitive prices to complete the project.

I'll update as I rough out the plumbing, but here's the misc fittings and pipe.

 

[drummereef]

UPDATE:


So it was time to replace the bulbs over the tank. I decided to give the Radiums another shot. I really liked the color of Phoenix bulbs for about the first 6 months but they started turning really purple towards the end of their life, which started to bug me. When I fired them up I started to remember what I liked about them 2 years ago. Crisp white with a cool blue overtone.

Here's a size comparison between the old Phoenix (LEFT) and the new Radium (Right).

Another angle.

Closeup.

I also started roughing out the plumbing on the reactor. This is not the reactor that I will be using since it's still online, but it is the same footprint as the SMR1. But it will give you an idea of what the finished mod will look like (kinda). More updates to come on this project...

 

[psteeleb]

looking good :thumbsup:

 

[mattsilvester]

UPDATE:


So it was time to replace the bulbs over the tank. I decided to give the Radiums another shot. I really liked the color of Phoenix bulbs for about the first 6 months but they started turning really purple towards the end of their life, which started to bug me. When I fired them up I started to remember what I liked about them 2 years ago. Crisp white with a cool blue overtone.

Here's a size comparison between the old Phoenix (LEFT) and the new Radium (Right).

Another angle.

Closeup.

I also started roughing out the plumbing on the reactor. This is not the reactor that I will be using since it's still online, but it is the same footprint as the SMR1. But it will give you an idea of what the finished mod will look like (kinda). More updates to come on this project...

I'd be really interested to see the before and afters for the new bulbs

 

[drummereef]

looking good :thumbsup:

Thanks Pete.

I'd be really interested to see the before and afters for the new bulbs

I'll post some new pics up once the bulbs burn in a little longer.

 

[drummereef]

UPDATE:


Here's the before/after shots with the new Radiums now that they've burned in for a couple days. It's pretty subtle in the pics but the tank is definitely brighter and lacks the purple hue it had while running the Phoenix bulbs (in a good way).


Phoenix:

Radium:

Also, here's some progression shots of a coral that's made quite a comeback since it's first addition to the tank.

 

[iwishtofish]

Is the camera exposure exactly the same? It looks to me as if the Radiums are a tad bit brighter.

I love that last coral, in particular!

 

[drummereef]

Is the camera exposure exactly the same? It looks to me as if the Radiums are a tad bit brighter.

I love that last coral, in particular!

Yes, I went back and matched the settings of the Phoenix shot with the new pic. I also duplicated the post processing so they should be exactly the same. Now I will say, I ran the Phoenix bulbs on HQI for probably way longer than I should have, so intensity was probably effected significantly. That's why I think the spectrum changed so drastically towards the end. But the tank is definitely brighter with the new Radiums which is somewhat expected I suppose considering they are fresh bulbs.

 

[drummereef]

UPDATE:


Added a few new additions to the clean up crew today. Like I mentioned before, I've been battling some bubble algae for a while now to no avail. As much as I manually removed it would just come back even stronger. It probably wasn't helping that my Vortechs were making Bubble Stew out of some of it too. :lol: In any event, I added 3 male Emerald Crabs and a Yellow Sea Cucumber today. No proof yet, but it looks like the Emeralds might do some damage to the bubble algae, seeing that they started nipping at the rock right away. Here's some pics!


Acclimating the 3 Emerald Crabs.

Acclimating the Yellow Sea Cucumber. I had one of these in my old 40g and it did a great job keeping the sand clean. And they are just kinda cool to watch. haha

Action shots of the Emeralds in the tank. Pics were taken with the flash ON since the lights aren't on yet, so the colors are not quite accurate.

Plenty to eat here! :hammer: