EcoTech Radion - Profile Sharing

[ange062]

Anybody interested in sharing custom lighting profiles for their Radion? I'm interested to see how others are using theirs.

I have a couple of baseline acclimation (low intensity) profiles complete with a sunrise/sunset that I have found to be a fairly accurate color/time rendition of the real thing.

 

[TucanSam007]

As soon as I get mine hung I'll deff be interested in the profile sharing . I need a good acclimation profile for starters

 

[ange062]

Cool, let me know when you get it setup! Anybody else have a good custom profile going yet?

 

[edsreef]

Yeh, I'll have some to share. Mine are 3 light programs though and right now I'm starting off at low intensities too, like 40% max.

Have you found a way to review the color temps used in your saved programs? I haven't figured that out yet and have to keep notes on paper to know what the settings are at any given point in time.

 

[ange062]

Yeh, I'll have some to share. Mine are 3 light programs though and right now I'm starting off at low intensities too, like 40% max.

Have you found a way to review the color temps used in your saved programs? I haven't figured that out yet and have to keep notes on paper to know what the settings are at any given point in time.

If you double click the control point it will show what color temp you are using (whether it is custom or a defined value such as "red and white"). One thing I have noticed with this is that there is a bug that makes the intensity for that control point always default to the maximum value, which is kind of annoying.

 

[edsreef]

OK I have a decent 3-light starter progaram worked out I can share. If anyone wants it pm me.

Description: File name "60peak". A 3-light, 12 hour acclimation program with transitions and short peaks of 20K @ 60% and 10K @ 40%. Transitions between Deep Blue, 5k, 7k, 10k, 18k, and 20k. To be used with 3 lights ungrouped. Mine are identified from L to R, 1-3. My start and end times are 9:30am and 9:30pm. (note: at this point in time with the software, these times will have to be re-entered, or an equivelent 12 hour period should be entered).

 

[EcoTech Service]

If you double click the control point it will show what color temp you are using (whether it is custom or a defined value such as "red and white"). One thing I have noticed with this is that there is a bug that makes the intensity for that control point always default to the maximum value, which is kind of annoying.

In order to set a custom intensity on one of the preset color schemes, you'll want to first select the preset and then click "custom" on the dropdown menu. Doing so will then allow you to adjust and save the intensity.

 

[ange062]

In order to set a custom intensity on one of the preset color schemes, you'll want to first select the preset and then click "custom" on the dropdown menu. Doing so will then allow you to adjust and save the intensity.

Thanks for the feedback! Looks like the latest software release I just received and email about has fixed this issue even when using predefined spectrums.

 

[ange062]

The new software version is a major improvement! Profiles created with the 1st rev don't port over well, but the new version does a much better job of storing information in the profile and all my major gripes have been fixed.