GHL Doser 2 Pre Order Starts!

[AQD_ottawa]

After the massively successful launch of the NEW GHL Doser-2 at Macna Last weekend we can now announce the pre order schedule.

But first a key reminder of the features that made the Doser one of the star attractions to the show!

Key features
• Built in Wifi
• IOS - Android - MY GHL cloud and direct software enabled and ready.
• Available in 3 or 4 pump units (3 pump can be upgraded to 4 pump later on)
• Total of 16 pumps in one chain
• Stepper motor driven
• ALL German parts
• Doses down to 0.1ML
• Interactive control will monitor your container levels and warn you when one is running low
• Pharm grade dosing tubing allowing the dosing of Iodine and other strong chemicals
• Level ports for Auto top off and Auto water changes
• Temperature port for monitoring chilled coral fine foods.
• PAB (ProfiLux address Bus) enabled allowing for expansive future add on accessories
• 4 x 24vDC inputs for GHL’s dedicated stirrers.
• 2 year warranty an all parts other than service items such as peri tubing and pumps.

Full details here
https://aquariumcomputer.com/en-GB/products/ghl-doser-2

Pre Orders start 15th September.

3 channel doser = $484.00 (USD)
4 channel doser = $559.00 (USD)

We have a significant dealer base so please email us info@ghlna.com for the closest dealer to you.

Reef central stock holding sponsors are
Aqua Cave
Premium Aquatics
Salty Supply

Due too sponsorship restrictions we are unable to list others.

 

[unze]

Just wondering if the doser 2 standalone can be used with the profilux? or do you need to buy the slave.

 

[AQD_ottawa]

You need to buy slave version.

 

[unze]

Oh, Would have been nice if it could be controlled also by the profilux . so you would have a choice of standalone or slave with one unit.

 

[ssdawood]

Is the four pump standalone. Or is it the slave.

 

[AQD_ottawa]

Stand alone, the slave has not launched yet.

 

[ssdawood]

Is that stepper motor variable speed or single. So flr water changes can I up the speed or will it work on slow dosing speeds?

 

[AQD_ottawa]

It is driven by time not speed. min dosing 0.1ml and max is currently 45ml per minute.

 

[AQD_ottawa]

Many dealers across the USA and Canada now taking pre orders!

Get on the first wave.

Stock holding info
info@ghlna.com

 

[Le_Cats]

The pre order give a good price or is the same after ...... ?

 

[AQD_ottawa]

Same after price has been set as low as possible for everyone to enjoy not just a few at the start.

 

[doggydoc]

Any ideas of when will it hit the USA ?

 

[AQD_ottawa]

we were told yesterday there is a two week delay so I am assuming this means we will receive into Ogdensburg warehouse last week of October if this schedule stays on target.

 

[AQD_ottawa]

We are pleased to announce 2 more dealers to the GHL line up where you can pre order

http://www.cayugaaquatics.com/

http://www.picassoexoticaquatics.com/

 

[herbklee]

+1

oh, would have been nice if it could be controlled also by the profilux . So you would have a choice of standalone or slave with one unit.

you need to buy slave version.

 

[AQD_ottawa]

The issue here is cost.

why should profiLux owners pay for built in control that the SA doser comes which they dont need?

 

[itsmorefun]

Maybe for have 1 temperature port + 2 level port, that which is cheaper than buy dosing pump + expansion box for just these need?

 

[AQD_ottawa]

or you could add PLM-ph temp and PPLM-4level to you profilux controller

 

[itsmorefun]

No because no free port (PLM-Oxygen + PLM-PWC).

And the logic is the same:
GHL Doser 2 is cheaper than GHL Doser slave + PLM-ph-temp + PLM-4level

 

[AQD_ottawa]

then get the doser 2 slave when it launches