help resetting my 6100 manually

[hawaiian_boi]

i purchased a used unit and it is in slave mode and i cant change anything. Can i manually reset the light from the touch pad because i dont have the cord to attach it to the computer?

 

[GazzMan]

You have to plug the lead in to change it from slave to master if your not running it through the card in the profilux wirelessly.

 

[hawaiian_boi]

When u say lead in do u mean the power coming into the light fixture? I'm lost when it comes to electronics. Not to sound stupid but I bought the unit used so I don't know if it has the wireless card in it.

 

[GazzMan]

The wireless card goes in the profilux, as per pm, in this hole,

You have to put this lead,

Then clip on mitras in gcc, no you can't control the light from the touch:mad2:, it would be great if you could

 

[jthao]

If the touch pad isn't disabled, maybe U can change it from slave to standalone on the touchpad. If it's disabled, then U have to plug in your mitras to your computer and reset it in the GHL control center/command software (whatever it's called).
If you have a wireless card in your profilux, then you can use the profilux to control your light, but if you don't know if U have the wireless card or not on your profilux, then you probably don't have it.
Best way would be to grab yourself a mini USB cord, one that'll fit into the USB port on the mitras as shown above in the pic and plug the USB end into your computer and change everything/modify it through the software.