How to Program Tunze Pumps on Controller

[marinefreak]

I have just bought the GHL profiliux kit and also got the tunze cable1 and cable 2 as i want to control my tunze pumps.

How do i connect these is it on L1 and L3 ? and how and where do i program them in the controller.

do i need a splitter to put it on L1/L2 ?

 

[kidney514]

The first that will help you understand better is that Tunze1 will react to all odd L ports and the Tunze2 will react to all even L ports.
You don't need a splitter, if you plug the Tunze1 in L1L2 your pump will react to L1 and if you plug you Tunze2 in L3L4 it will react to L4.
If you use a splitter will be able to plug both in L1L2 and then Tunze1=L1 and Tunze2=L2.

 

[marinefreak]

Thanks for that, i thought it may be something like that i did not think it would use both the sockets to control the two tunze pumps. I will get a splitter.

My remaining question is the programming of these, the manual does not cover this, any assistant helpful.

 

[AQD_ottawa]

From page 48 onwards covered in depth

http://www.ghl-kl.de/Produkte/Aquaristik/Download/Manual_ProfiLuxII_V403.pdf

Hope that helps