introducing an anemone to a tank

hamiltonguy

hamiltonguy

New member
I've read in many places that a tank should be mature before you introduce an anemone, meaning at least a year old. My question is if you have had a tank running for a year and then decide to upgrade to a bigger tank, do you have to wait another year or can you introduce it much quicker? (Assuming that all the liverock and most of the live sand and water was added to the new tank).
 
IMO, the waiting is two fold, to give the tank time to settle in, and (( if you ask me, more importantly )) to give the reefer time to get used to the tank, and how to care for it before something goes wrong.

As for the case that you mentioned, (( and assuming that you have experience with anemones )) I would say a month or two after the transfer would be fine --- should stress, having experience with anemones, and been keeping tanks for a while.

Recently (( about a month ago )) I transferred my 29 into a new 33 cube. Over the weekend I added an LTA, so far it is doing great. Should note that I have been in the hobby since '92, and have been keeping anemones for 15 years (( my current oldest anemone is 9+ years old )).
 
Well I haven't kept an anemone yet. If I get one it would be my first but i've been reading up alot on them. Of course reading isn't the same as first hand experience.

Also, I was wondering if a BTA can be kept under PC lighting or does it require at least T5's?
 
I took a bta out of one tank and put into a new (bigger) tank with the old water. It did just fine and loves his new home. Some anenomes seem to be really strong. Put this bta in my original tank after 2 months and has been doing great.
 
Hm, thanks for the info guys i'll definitely keep that in mind when getting an anemone.

Any comment on the lighting required?
 
PCs are generally considered the bare minimum to keep a BTA. How many watts are the PCs, how far above the surface are they, and how far below the surface is your highest rock point?
 
the PC's are 50/50 65w 10k daylight and 65w 460nm royal blue actinic. They are about 3-4" above the tank (just estimating not quite sure).
The highest point of the rock is probably about 1-2.5" below water line. I'm also planning on getting a bit more rock so I can make it just about 1" below water line and keep a monti cap in the future :D.
It's a 20g tank with over 40x turn over. As of yet I only have an elegance coral and a torch coral. Ive been thinking of getting more but if I can keep an anemone I'd rather wait and get it first.
I probably won't get it till April anyway when my university term is over but just looking to get all the info now.
 
Your placement of the bta will have a lot to do with the lights. I have good luck with my bta sitting about 12 inches from my light, but I have some mh's. Also waterflow is something to consider. Imo, feeding them well can go a long ways to make up for lighting deficiencies. One thing about them, they will let you know when they are not happy.
 
<a href=showthread.php?s=&postid=14310555#post14310555 target=_blank>Originally posted</a> by maddmaxx
seeking info before a decision in this hobby is very good. cudo's to you for that
Click to expand...

Thanks man :rollface:

So, what's the verdict on my light & rock set up?

Also, suppose I do get one under my PC's and it doesn't settle or starts to shrivel, what do I do? Take it out? if so, how?
 
Imo, you could keep an anemone with that light considering the smaller tank. Your right about getting it first, because if it grows like it should, you will have a dinner plate before too long. Find a piece of live rock that has a nice crevice in it for the foot of the anemone. I place my with my hands.
184536P1020528.jpg
 
I think i have the perfect crevice in my highest rock for the foot. It's literally just a hole big enough for a pretty much adult clown fish to swim through. I think that SHOULD be good for a small BTA. Of course I will get more rock before i get the BTA. I might pick one up from a local reefer or LFS. As I hear shipping anemones may bleach them.

Any signs to look for when picking out an anemone?
 
Look out for the bleaching just like you said. A gaping mouth is cause for concern. Of course, if shriveled up, be careful. Make sure foot looks in good shape.
 
Wait before this gets closed a couple more questions came to mind.
1) I have to koralia 1's on each side of the tank closer to middle-lower end on the wall. Would these be a concern when adding the anemone?
2) I have an elegance coral sitting on the sand. I know these corals are very sensitive. Should I be worried about the elegance with a new anemone?

edit: what are the chances of a LTA thriving under my lights as well?

sorry for all the questions these just randomly poppped into my head while I was studying chemistry for a midterm :rolleyes:
 
Last edited:
Chances are the anemone will not want to be in the direct flow of the koralia (although I don't know about a "1's" flow). Just reposition stuff to accomodate that fact. If the flow is too high...the anemone will move. Don't let the anemone touch the coral. Give about 6 inches of space. Those arms can really sweep out there especially as they get bigger. Pay attention to which way those arms are flowing (depends on current of course) when placing future corals.
 
Koralia 1's are at 400gph and with two in a 20g tank, I'm hoping is more than enough flow. What are the chances of the anemone staying near the top as my lighting is just PC's but at about 7.5wpg.
 
7+ watts a gallon should be fine. Don't really even think you need to worry about him being near the top. My concern at this point would be the water flow. Anemones can be funny about how much flow they get. But again, they will let you know and move on you. Currently I have an anemone sort of under a koralia 2. In other words, the powerhead is situated above the anemone. In another post, you will see someone talking about using a powerhead to dislodge an anemone from a rock...so I think most agree that they can't have too much flow on them.
 
You must log in or register to reply here.

Similar threads

B
Ritteri Swollen Mouth
Replies
8
Views
634
Bakeman
B
A
How to introduce new clown fish
Replies
14
Views
2K
Brian60077
Brian60077
Niven
I'm back....and ready to jump back in, feet first in the deep end, speedo, everything!
2
Replies
20
Views
339
vlangel
vlangel
W
Back in the game...
Replies
8
Views
3K
WMCWINGS186
W
padi200
Which salt and 4 more things!
2
Replies
30
Views
1K
Billfishbrsin
B
Back
Top