shred5
Premium Member
Would 3 A360s not be sufficient?
Yes the W = wide lens would cover 24"x24".
Would 3 A360s not be sufficient?
Need some kessils users give me a good advise , I am almost thinking my kessils is not performing well to my Acros , not coloring up and even go dark , I wonder if it is my setting on colors and intensity is not correct .
I got 2 kessils A360WE hang about 55cm from the top layer of my live rocks and that's where my Acros located. Or from the lights to my tank base glass (bareback tank) is 75 cm.
My LPS is fine but my complain is my Acros is not coloring up, below is my setting:
![]()
![]()
![]()
![]()
![]()
![]()
I have seen someone here has color set as low as less than 50% or even less to 10%, I know the lowest color the bluer and this may be the actual lights our color needs .
I also understand LED are useless to Par meter that is reason why I am not considering to buy one.
One more questions :
Corals dark due to light is not enough ?
Corals bleached due to light is too strong ?
Tell me , what should be the right setting for color vs intensity .
Thanks
Was hoping someone could help me with a question. I've got 2 A160WE and the Kessil controller coming for a new build I'm doing. My question is do I need to order any other cables to hook the lights to the controller or will they come with everything I need?
you will need one cable to jump from one light to the other. Just go to Walmart and buy a 3.5mm cable in whatever length you need
I got a brand new A160WE and noticed the color was different from one side of the tank to the other. Not a lot, but noticeable. I have my tank sitting in a corner and the light spillage against the walls made this very noticeable.
Can anyone confirm that this is normal? From looking at the light's reflection off the water surface, it appears all chips are working.
Just be sure to get the stereo cord (3 section tip), not the mono (2 section tip) one like I did the first time.
Yes it's normal. I see that with my A360WE lights. One casts a green hue to the wall, the other a purple. Tank is doing great. I think it's just how the LED array casts light through the lens.. you are fine.
I have since switched to 65% color from 30% but it sure feels very white and has lots of glare in the tank. Do you think having the 360s up off the tank a bit is super important?
Right now I have the 2- 360s over a 36 gallon tank which I know can seem excessive but I have them 4 inches off the water to keep light spill down and just backed the intensity down to 45%. The corals are all doing very well but just looking for some input on what is the best path for a basic setup.
Anyone have insider scoop on any new potential releases? I am planning on upgrading to kessil a360we but if they are releasing something within the year I can wait.